My audio install- Luke box, MS8, 500/5, 10W3v3, and more...

[oekundar]

Great thread, sorry to hear you sold the e30...chances are you'll be back. :)

[nrubenstein]

Been thinking of adding some kind of dsp to my system for a while, it's fully capable of tuning manually as well right? I see them going for around 250 on eBay so I may add this to my system

The MS-8 is very, very automatic and does not allow much manual tweaking.

[george graves]

Been thinking of adding some kind of dsp to my system for a while, it's fully capable of tuning manually as well right? I see them going for around 250 on eBay so I may add this to my system

This is the new kid on the block, but totally amazing for the price. https://www.minidsp.com/products/min...2-x-in-4-x-out

[Garrick2007]

Been thinking of adding some kind of dsp to my system for a while, it's fully capable of tuning manually as well right? I see them going for around 250 on eBay so I may add this to my system

[Cptcarisma]

The End?????!

Ughhhhhhhh.

[Dirtboy]

Sad day today, just sold the E30. :(

[Dirtboy]

I know this is years old, but any chance of getting some pics of how that amp is mounted on the left side of the trunk?

Sorry, I don't have any pics of that. That's the MS-8 DSP on the left side. I have it mounted to 1"x3" boards that are wedged into that space. The cover is made out of carpet-covered cardboard (I know, LMAO, but it works). I added LED lights to the trunk and put the switch on the MS-8 cover.

[potatomash]

I know this is years old, but any chance of getting some pics of how that amp is mounted on the left side of the trunk?

[Dirtboy]

How did you mount the ms8 in that space? Wood backing? I have been thinking about doing that in my trunk.

Looks Great!!

Thanks!

Yeah, I used some wood backing. 1"x3" wood to make a frame then used some metal muffler straps and bolted the frame into a few places in the trunk. Like I said, I still have to get around to making the trim piece.

I'm kinda waiting on that because I still would like to either find some carpet dye to match it all or get more carpet like what Luke includes in his box and just glue that over the trunk liner pieces.

Do you have the part number from BAv Auto?

51 49 1 916 246 Just plug that into the search field in BavAuto and it should come up.

[stormspike]

Do you have the part number from BAv Auto?

[hfabricius]

How did you mount the ms8 in that space? Wood backing? I have been thinking about doing that in my trunk.

Looks Great!!

[Dirtboy]

You should make a small beauty panel for the MS8 like you did the JL amps. Would clean it up even more.

This is one of my favorite e30 installs for sure and that MS8 has me tempted.

Yeah, I plan on doing just that, but the weather has been pretty crappy and I've been real busy at work so I haven't had the time to make the panel for the MS8.

It doesn't help that it's party season here in Germany so pretty much every weekend is booked.... lol

[Schnitzer318is]

You should make a small beauty panel for the MS8 like you did the JL amps. Would clean it up even more.

This is one of my favorite e30 installs for sure and that MS8 has me tempted.

[Dirtboy]

What is that channel you are using to hide the wires?
That's just normal plastic electrical conduit that I spray painted grey.

How did you mount the C43 to the heater control panel? Any pictures?
I don't have any pictures, but I just followed what others on R3V have done. If you search for C43 or CD43 you should come up with some other write ups.

How are you wiring component front channel AND tweeter sails? Are you putting a passive crossover between the components and the tweeters? Or are you using a separate amplifier channel for the components and the tweeters?
Components are on the JL 300/2; they have their own passive crossover for the tweets. Sailpanel tweets are run off the 25w section of the JL 500/5, they also have their own passive crossover strictly used for tweeter protection. The JBL MS8 is doing all the crossover action for all the channels.

How can I source one of those beautiful interior trunk lid panels?
I ordered mine through BavAuto. The dealer here in Germany said they were NLA...

Lookin’ good!
Thanks!

[dogsbark26]

What is that channel you are using to hide the wires?

How did you mount the C43 to the heater control panel? Any pictures?

How are you wiring component front channel AND tweeter sails? Are you putting a passive crossover between the components and the tweeters? Or are you using a separate amplifier channel for the components and the tweeters?

How can I source one of those beautiful interior trunk lid panels?

Lookin’ good!