Help? Replacing OEM stereo to aftermarket Pioneer HU

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • AndrewBird
    replied
    Download the ETK from here:



    Page 102 should be correct. Cut the wires going into the fader (from the speakers) and wire them to your new stereo.

    Leave a comment:


  • daytonaviolet
    replied
    Originally posted by darkcolor.666
    yes, the new HU has front left, front right, rear left, rear right. But how do i know which wire in my current dash is FL, FR, RL, RR??????????????
    Best way is to use a small battery, AA. Then short a pair of wires one at a time. The speaker will make a small popping sound. From there you'll figure out which one is which. Just tap the wire only for a sec. Holding the battery too long may damage the speaker.

    Leave a comment:


  • darkcolor.666
    replied
    Originally posted by daytonaviolet
    yea i saw that. it appears that you dont have premium sound. so, with your new head unit. does it have front and back fader control? if yes, just wire accordingly.

    :D
    yes, the new HU has front left, front right, rear left, rear right. But how do i know which wire in my current dash is FL, FR, RL, RR??????????????

    Leave a comment:


  • daytonaviolet
    replied
    Originally posted by darkcolor.666
    And no the back of my oem headunit does not look like your pics. I posted pics of how the plug looks like.
    yea i saw that. it appears that you dont have premium sound. so, with your new head unit. does it have front and back fader control? if yes, just wire accordingly.

    :D

    Leave a comment:


  • darkcolor.666
    replied
    And no the back of my oem headunit does not look like your pics. I posted pics of how the plug looks like.

    Leave a comment:


  • darkcolor.666
    replied
    1989 325i coupe

    Leave a comment:


  • daytonaviolet
    replied
    Quick question what year is your car? Is it 88 or newer? Does the back of your head unit look like this? Because this DIY posted is only for 88 or newer with premium sound. if you headunit is different, then the DIY in the link does not apply to you. looks like you now have the L/R speaker color scheme. just simply hook the speaker wires to your new harness.

    Attached Files
    Last edited by daytonaviolet; 04-20-2013, 05:46 PM.

    Leave a comment:


  • darkcolor.666
    replied
    Ok so here are some pics. I apologize in advance for posting so many pics, but i really hope someone can help me.

    Because i yank everything apart by random and didnt label anything (stupid on my part), i m going on a hunch on how these actually plugged into the old oem head unit. I went by the PHYSICAL connection, and they seem to fit perfectly, so i ASSUME these are how they were connected.

    As you can see, there is...

    -blue & blue/brown cable connected to plug labeled "LEFT"
    -yellow & yellow/brown cable connected to plug labeled "RIGHT"
    -brown & grey/purple +12V cable connected to plug labeled "GND IGN"
    -tiny white cable connected to plug "PWR ANY"



    The fader is the BLACK plug on the far left side next to the hazard light one? I took a pic on what cables are connected there. Someone mentioned i have to rewire these, does it mean i need to cut the wire loose from the fader and rewire them to my Pioneer adapter plug?

    I took a few more pics of what cables are currently connected to the fader, and there are, as you can see in the pics...

    -blue & blue/red cable
    -blue & blue/black cable
    -yellow & yellow/red cable
    -yellow & yellow/black cable
    (and this is what's throwing me off, i dont NOT see any ORANGE cable as shown in the diagram)

    As you can see, i have my Pioneer adapter plug rewire with the blue connectors ready to be 'connected', but i am just unsure what to reconnect where.

    Please help, i feel so stupid about this...

    Off the topic: as someone pointed out, the other bundle cable i have on the far right hand side, i posted a pic of them too, those cables are unrelated to my purpose right now, correct?























    Leave a comment:


  • daytonaviolet
    replied
    Plug thr Oem plugs back into the Oem head unit. Write down all the colors you have. From there we can figure it out.

    Leave a comment:


  • darkcolor.666
    replied
    Explain to me why there 4 brown/orange? You telling me 4 pairs of speakers goes into the same brown and orange cable, which I don't have?

    Leave a comment:


  • darkcolor.666
    replied
    Plug what back in where? Lol no idea what you talking about

    Leave a comment:


  • daytonaviolet
    replied
    why dont you plug the wires back in and list the colors you have here. are all the other Dash Wires there?

    Originally posted by darkcolor.666
    Also, in the diagram, it said on the dash there should be

    a brown/orange cable, I don't see this. And this brown/orange cable showed up 4 times in the diagram. What the hell? I don't get this. and i repeat, i do not see a brown/orange cable in my dash




    Aftermarket-----------Dash Wires-----------Speaker Wires

    RF+ Grey--------------Blue/Red-------------Grey/White
    RF- Grey/Black--------Brown/Orange--------Grey/Brown

    LF+ White------------Yellow/Red------------Grey/Red
    LF- White/Black-------Brown/Orange--------Grey/Violet

    RR+ Violet------------Blue/Black------------Black/White
    RR- Violet/Black-------Brown/Orange--------Black/Brown

    LR+ Green------------Yellow/Black----------Black/Red
    LR- Green/Black-------Brown/Orange--------Black/Violet

    Leave a comment:


  • darkcolor.666
    replied
    Also, in the diagram, it said on the dash there should be

    a brown/orange cable, I don't see this. And this brown/orange cable showed up 4 times in the diagram. What the hell? I don't get this. and i repeat, i do not see a brown/orange cable in my dash




    Aftermarket-----------Dash Wires-----------Speaker Wires

    RF+ Grey--------------Blue/Red-------------Grey/White
    RF- Grey/Black--------Brown/Orange--------Grey/Brown

    LF+ White------------Yellow/Red------------Grey/Red
    LF- White/Black-------Brown/Orange--------Grey/Violet

    RR+ Violet------------Blue/Black------------Black/White
    RR- Violet/Black-------Brown/Orange--------Black/Brown

    LR+ Green------------Yellow/Black----------Black/Red
    LR- Green/Black-------Brown/Orange--------Black/Violet
    Last edited by darkcolor.666; 04-18-2013, 05:22 PM.

    Leave a comment:


  • darkcolor.666
    replied
    Originally posted by StereoInstaller1
    OK, see how there are 3 bundles? First, there is the bunch attached to the fader. Unplug the fader, you will need the wiring there.

    Second, the bunch that connects to the fader wiring and runs deeper in the dash is you deck harness. You have it VERY easy, you can is one of the easiest E30s there is.

    Use the color guide in the stickied thread, should make it easy for you.

    Oh yeah, that third bundle, the one on the left..well, that ain't radio stuff, you ripped wires and lights out of the heater controls.

    Lemme know if you get stuck, this one is super easy.

    Luke
    You said the cables that are coming from the fader are the ones I need to rewire, those ARE the cables bundle on the left, but then you said the cables on the left ate not radio cables. Wait what? I m so lost.

    I also have TWO cables that are yellow/red combination. Which one is which?

    Leave a comment:


  • Skunkworks
    replied
    Yes you will use the metal frame, get every thing wired up make sure that it works including your heater control wires that got pulled out and all the bulbs are in and working.

    Test fit the frame once it fits right push the tabs in to the dash plastic and slide the chassis in. Make sure to get the wires so they are fitting nicely in the hole, click it in and install the metal trim.

    Leave a comment:

Working...