Help? Replacing OEM stereo to aftermarket Pioneer HU
Collapse
X
-
sorry for the confusion. basically that link explains how to hook up an after market head unit and still utilizing the stock speaker harness. the stock setup from bmw goes like this head unit --> oem amp --> speakers.
this instructions explains how to hook up an aftermarket head unit (use the power from the head unit) and also bypass the stock bmw amp.
if this is not what your after, then ignore that link above.
Leave a comment:
-
I m confused...Leave a comment:
-
It's because if you don't rewire your trunk, you'll use the Oem amp in trunk. The diagram bypasses the stock amp but allows you to reuse the wires and connect inputs under dash. Other option is rewire from scratch. You don't want I do that.. Do you?
(dam iphone w/ auto word select and spellcheck)Last edited by daytonaviolet; 04-18-2013, 09:48 AM.Leave a comment:
-
I m not installing any amps, I m just replacing the head unit, why do I need to do anything in the trunk?
i've used this guide times and it's perfect. when you access the amp in the trunk, you just have to connect the Dash Wires to the Speaker Wires in the trunk. this is because you'll be bypassing the oem amp but you'll reuse the wire harness which goes to the specific speakers already wired in the car. :)
Obviously, what you do here is simple: connect the "deck" wire to the "dash" wire, then back at the trunk, connect that "dash" wire to the "speaker" wire.
This is not rocket surgery, boys. Get it done.
Aftermarket-----------Dash Wires-----------Speaker Wires
RF+ Grey--------------Blue/Red-------------Grey/White
RF- Grey/Black--------Brown/Orange--------Grey/Brown
LF+ White------------Yellow/Red------------Grey/Red
LF- White/Black-------Brown/Orange--------Grey/Violet
RR+ Violet------------Blue/Black------------Black/White
RR- Violet/Black-------Brown/Orange--------Black/Brown
LR+ Green------------Yellow/Black----------Black/Red
LR- Green/Black-------Brown/Orange--------Black/Violet
(+12V Unswitched) Yellow----Red/Green (Changes to Yellow at C302)
(+12V ACC) Red-------------Violet/White (Changes to Voilet/Grey at C302)
(Ground) Black---------------Brown (may also be Brown/Black)
(ILL) Orange-----------------Grey/Red (Changes to White at C302)
(P ANT) Blue-----------------White (this is one of 2 white wires)
(AMP REM) Blue/White--------White (this is the one in the same harness as the speakers)Leave a comment:
-
i've used this guide several times and it's perfect. when you access the amp in the trunk, you just have to connect the Dash Wires to the Speaker Wires in the trunk. this is because you'll be bypassing the oem amp but you'll reuse the wire harness which goes to the specific speakers already wired in the car. :)
Obviously, what you do here is simple: connect the "deck" wire to the "dash" wire, then back at the trunk, connect that "dash" wire to the "speaker" wire.
This is not rocket surgery, boys. Get it done.
Aftermarket-----------Dash Wires-----------Speaker Wires
RF+ Grey--------------Blue/Red-------------Grey/White
RF- Grey/Black--------Brown/Orange--------Grey/Brown
LF+ White------------Yellow/Red------------Grey/Red
LF- White/Black-------Brown/Orange--------Grey/Violet
RR+ Violet------------Blue/Black------------Black/White
RR- Violet/Black-------Brown/Orange--------Black/Brown
LR+ Green------------Yellow/Black----------Black/Red
LR- Green/Black-------Brown/Orange--------Black/Violet
(+12V Unswitched) Yellow----Red/Green (Changes to Yellow at C302)
(+12V ACC) Red-------------Violet/White (Changes to Voilet/Grey at C302)
(Ground) Black---------------Brown (may also be Brown/Black)
(ILL) Orange-----------------Grey/Red (Changes to White at C302)
(P ANT) Blue-----------------White (this is one of 2 white wires)
(AMP REM) Blue/White--------White (this is the one in the same harness as the speakers)
Thanks guys. I was looking at the sticky yesterday and I m starting to understand it. I m confused from the sticky about the 'speaker wires'? The portion that's on the car right of the diagram, which suppose to be wirings in the trunk? I m going to worry about that later.Last edited by daytonaviolet; 04-18-2013, 07:42 AM.Leave a comment:
-
Thanks guys. I was looking at the sticky yesterday and I m starting to understand it. I m confused from the sticky about the 'speaker wires'? The portion that's on the car right of the diagram, which suppose to be wirings in the trunk? I m going to worry about that later.OK, see how there are 3 bundles? First, there is the bunch attached to the fader. Unplug the fader, you will need the wiring there.
Second, the bunch that connects to the fader wiring and runs deeper in the dash is you deck harness. You have it VERY easy, you can is one of the easiest E30s there is.
Use the color guide in the stickied thread, should make it easy for you.
Oh yeah, that third bundle, the one on the left..well, that ain't radio stuff, you ripped wires and lights out of the heater controls.
Lemme know if you get stuck, this one is super easy.
Luke
As for the new head unit, it comes with a metal frame thing that for securing the headunit to stay in place. Do I install the metal frame to the center console first, then push the head unit in, or do I leave the metal frame on the head unit and push the whole thing into the center console?
Sorry guys this is my first time, be gentle. :)Leave a comment:
-
OK, see how there are 3 bundles? First, there is the bunch attached to the fader. Unplug the fader, you will need the wiring there.
Second, the bunch that connects to the fader wiring and runs deeper in the dash is you deck harness. You have it VERY easy, you can is one of the easiest E30s there is.
Use the color guide in the stickied thread, should make it easy for you.
Oh yeah, that third bundle, the one on the left..well, that ain't radio stuff, you ripped wires and lights out of the heater controls.
Lemme know if you get stuck, this one is super easy.
LukeLeave a comment:
-
Read the Sticky, print it. use it for the install. Thank Luke later.Leave a comment:
-
Wiring a deck is not that difficult at all, it is about about color matching....but things can be complicated if some one else has done poor job before you.
1 - Did all functions of OEM deck worked properly? fader, balance, power on/off...if they everything was well, then it would be safely to assume it was wired in properly, it could be messy, but at least properly. This will rest assure you're will not be dealling with messed up wiring.
2 - Use the OEM color coding to match the wiring from the car to wires comming from the deck. I beleive the sticky will have the color codes for the wires. In theory, you're dealing with a dozen or so wires, where 8 of them are for speakers, the rest are ground, power source and constant power. Use the installation manual from your deck to help to understand what each wire is for.Leave a comment:
-
-
Man, that's like, a lot of effort with all the pictures and everything.Leave a comment:
-
There is a sticky right at the top of the forum:
Leave a comment:
-
Help? Replacing OEM stereo to aftermarket Pioneer HU
Hi all, so i took out the old OEM tape deck wanting to replace it with a Pioneer i purchased from Bestbuy. But i am unsure how to do the wiring. Can someone please help me? Do i need some sort of adapter?
This is the rear of the new deck
Wiring that came with the new deck
Current wiring after pulling out old OEM tape deck
Old deck plugs
Tags: None

Leave a comment: