My starter mod...

[YAN-3]

hahah thats tight ud be carryin a e30 cig lighter in your pocket

:rofl:

[Alpine003]

Do this:

http://www.the12volt.com/relays/page2.asp#psk

with the cig lighter being the button to disable the dissabler.

No need as I have starter disable on my alarm.

[92 mtechnic cabrio]

Do this:

http://www.the12volt.com/relays/page2.asp#psk

with the cig lighter being the button to disable the dissabler.

did somebody mention a disabler disabler?

[ikonosin]

I'd maybe suggest something like this:http://www.autotoys.com/x/cust/produ...cat=174&page=1

Maybe mount the sensor for it in the center console near the ebrake, so this way, with your keychain still in your pocket you could start it. Adds a certain amount of security...

Kinda reminds me of my dads new Caddy, with the remote in your pocket you just hit the start button and you're off.

[AndrewBird]

Do this:

http://www.the12volt.com/relays/page2.asp#psk

with the cig lighter being the button to disable the dissabler.

[StereoInstaller1]

I also gut them and make them into subwoofer level controls.

Luke

[NC325iC]

i would rather have my cig lighter be the killswitch, ie you have to have it pressed in (non momentary) to start the car, then you push it again or take it out or something and the car wont start. then put like a windows switch or something like that up next to the hazard lights for the startup.

damn thats a good idea

[StereoInstaller1]

If you simply "gut" the base of the lighter assy, you could put a momentary contact pushbutton in the base. Simply push down on the stock lighter and your engine starts.

You could also do a starter kill by using a relay and a push-on/push-off switch to toggle the relay. Would be kinda tough to do both, start and kill, but possible...

Luke

[Alpine003]

Cool thing wiht that is that you could take it out of the car with you like HU faceplate and no one could start the car.

That would be a plus and to take it even 1 step further, you could actually "key" the cig lighter cylinder and the socket so only your cig lighter can fit into the socket. Obviously, these things would just be a detterant because techinically, they can just use a jumper wire to bridge the connections if they really wanted to.

I might have to redo my starter mod. Hmmm...

[DEV0 E30]

hahah thats tight ud be carryin a e30 cig lighter in your pocket

LAZER CUT KEYZ YO.

[blueapplesoda]

hahah thats tight ud be carryin a e30 cig lighter in your pocket

[AndrewBird]

yeah i bent the taps over so it will hit them instead of lock it down. I also welded across the spiral so it would conduct better, i have been able to actaully try it though

Cool thing wiht that is that you could take it out of the car with you like HU faceplate and no one could start the car.

[e304me]

yeah i bent the taps over so it will hit them instead of lock it down. I also welded across the spiral so it would conduct better, i have been able to actaully try it though

[Alpine003]

i did that, only i actaully used the stock cig lighter.

Interesting...I haven't really thought about it. Were you able to mod the housing so that it wouldn't lock when being pushed down? Also, did you have to modify the internal contacts?

[e304me]

i did that, only i actaully used the stock cig lighter.