Announcement

Collapse
No announcement yet.

need to roll up windows but engine and wiring harness out

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Gregs///M
    replied
    You can send 12 volts directly to the motors too. One polarity up and one down.

    Leave a comment:


  • Das Delfin
    replied
    https://www.r3vlimited.com/board/sho...d.php?t=428800

    Leave a comment:


  • iansane
    replied
    I had to do this recently and just grabbed the my cordless drill battery and jumped some wires from the switch.



    Looks like this shows violet and black for the driver side and violet/gray and black/gray for the passenger. Just try any polarity and it if rolls up, cool. If not, swap polarity.

    Leave a comment:


  • jeffnhiscars
    replied
    If there's a plastic plug on your door panels you can manually crank them up through that hole. You may need the plastic tool that's probably not in your tool kit

    Leave a comment:


  • need to roll up windows but engine and wiring harness out

    noob here, i am in the middle of rebuilding bottom to top and now that the engine/trans and wiring (c101) is all out. is there a way i can get power to the switches to roll up the windows?
Working...
X