About the e30 convertible.

[Echo30V]

I’m following that red Vert on BaT now. Should be interesting.

[berndt]

I saw that auction. Decided to replace the top on my very. Seems like it’s worth it. I hope at least


Sent from my iPhone using Tapatalk

[Echo30V]

I know, it's really sad. I hope it picks up here. The e30 vert is such a classic.

[phenryiv1]

I would expect more action here in the Vert section, what with Verts gaining some traction in price. Still am amazed that the Oklahoma car went for $21,500 on BaT.

Ever since photobucket ruined forums the traffic has died.

[Echo30V]

I would expect more action here in the Vert section, what with Verts gaining some traction in price. Still am amazed that the Oklahoma car went for $21,500 on BaT.

[rustneversleeps]

I believe it's part of his vert build thread. check here http://www.r3vlimited.com/board/show...264422&page=29

Hey thanks man started reading it yesterday and I'm only at page 5.
24 more pages to go.

Good info to have. Subscribed.

X2....

[Dagamus(NM)]

Good info to have. Subscribed.

[JWHIII]

Looking forward to seeing how you install it....
So did you start or any link..

I believe it's part of his vert build thread. check here http://www.r3vlimited.com/board/show...264422&page=29

[rustneversleeps]

Looking forward to seeing how you install it....
So did you start or any link..

[bradnic]

i'm converting my 7/90 build manual top to electric over the next few months. check my vert build thread starting April 2017 for info/pics.

[rustneversleeps]

as an auto if it available or just to see what all the parts consist of to make it an auto...

[N2MYE30]

Well 2 years later time to resurrected again...
Anybody have any news on how to install a electric top or where to buy..

are asking how to install an manual to an auto?

[rustneversleeps]

Well 2 years later time to resurrected again...
Anybody have any news on how to install a electric top or where to buy..

[fuzzysux]

tension straps - these are only rivited in to the top frame at the rear bow (3 rivets on each side). at all other bows, the straps are attached with very short screws.
at certain angles of the top open/close motion, you can get to most of these screws.
if you are DIY, it might be worth this method.
if you are anywhere near close to needing a new top, i suggest to all of my customers to consider the straps at that time. it is much less extra labor to "add" it to the job.

[fuzzysux]

regarding the top not folding correctly - there is a bar which links the motor on the pass. side of the car to the top frame. this bar length is adjustable and makes a big difference in how the top folds.
i have also found tops that open correctly but do not fold right because of broken bolts. when the top opens, it isn't so important since the top "wants" to lay open.. the weight of the front bow tends to align everything where it belongs.
check all hinge points (on both sides) of the top frame.