Announcement

Collapse
No announcement yet.

injector offset spec

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    injector offset spec

    Bosch 0280150947 blue, 24lbs.

    Anyone has data for the voltage offset aka dead time aka latency for this things? Want to make sure I got the correct value in MS2

    #2
    no one used 24lbs blue tops with Megasquirt?

    Comment


      #3
      Injector offset is less critical than some make it out to be. With your size injectors I would just put in a value like .9 or 1.0 if they are high-z. Unless you are having issues getting smooth idle and predictable AFRs, it's probably not worth characterizing them yourself or paying someone to do it.
      '84 318i M10B18 | 93whp/90ftlbs | 147- Safari Beige | MS2E w/ LC, 2-Step

      Comment


        #4
        Check the MSExtra forums, there are some rudimentary tests you can do to find the settings by changing the number of squirts. I found mine to be much faster than the recommend 1.0ms or whatever it is (mine are about 0.69ms). Mine are Bosch 24lb but a different part number than yours.

        Comment


          #5
          http://www.efidynotuning.com/injdata.htm

          then select from drop down
          89 E30 325is Lachs Silber - currently M20B31, M20B33 in the works, stroked to the hilt...

          new build thread http://www.r3vlimited.com/board/showthread.php?t=317505

          Comment

          Working...
          X