injector offset spec

[digger]

http://www.efidynotuning.com/injdata.htm

then select from drop down

[Digitalwave]

Check the MSExtra forums, there are some rudimentary tests you can do to find the settings by changing the number of squirts. I found mine to be much faster than the recommend 1.0ms or whatever it is (mine are about 0.69ms). Mine are Bosch 24lb but a different part number than yours.

[Jaxx_]

Injector offset is less critical than some make it out to be. With your size injectors I would just put in a value like .9 or 1.0 if they are high-z. Unless you are having issues getting smooth idle and predictable AFRs, it's probably not worth characterizing them yourself or paying someone to do it.

[zaq123]

no one used 24lbs blue tops with Megasquirt?

[zaq123]

Bosch 0280150947 blue, 24lbs.

Anyone has data for the voltage offset aka dead time aka latency for this things? Want to make sure I got the correct value in MS2