Water to Air Intercooler

[MattMc]

A little more progress, the feed in is tacked in place and the water splitters are ready. Cores and end caps are fitted. Mounting brackets are mocked up. The custom radiator for engine cooling is in place too but without it's fan shroud at pressent.

[240zs30]

Very good point. Nice to see you can run stage 2 on just the chip.

[Mtriple]

I did not get the chip with it. I got it awhile ago and it's missing a few pieces. I'm still debating between the MS or the TCD, even MarkD has a chip for the turbo now but it's even more money. In the end the chip may be the way I go just for simplicity. It seems that people who use the chip are happy but I would like to get rid of the maf. Are you running the chip on the stage 2?

Yes I am, and I've heard that its a MarkD chip but I cant confirm that. I would go with the chip first, you can always sell it later.

[240zs30]

You dont want to try the software that comes with the kit?

I did not get the chip with it. I got it awhile ago and it's missing a few pieces. I'm still debating between the MS or the TCD, even MarkD has a chip for the turbo now but it's even more money. In the end the chip may be the way I go just for simplicity. It seems that people who use the chip are happy but I would like to get rid of the maf. Are you running the chip on the stage 2?

[Mtriple]

Ok.Just a basic M20. I have a TCD kit sitting for more than a year (very patient) and I have been waiting to sort out the engine management before installing it. It's a Log style manifold so the turbo will be down and out of the way. I have been looking atTCD's water to air intercooler kit also mainly because I would like to keep my A/C (FL temp)and I like the stealth.

You dont want to try the software that comes with the kit?

[240zs30]

.

Ok.Just a basic M20. I have a TCD kit sitting for more than a year (very patient) and I have been waiting to sort out the engine management before installing it. It's a Log style manifold so the turbo will be down and out of the way. I have been looking atTCD's water to air intercooler kit also mainly because I would like to keep my A/C (FL temp)and I like the stealth.

[MattMc]

I think a completely different set up would be required we have 3 generic layouts but more are been added as we go along.



PPM Racing have three BMW's for us to cool, an E10 which will be fully worked and running big boost. The one currently underway shown in this thread and I do believe the other is an M20 so you might be lucky I will have a look the next time I'm at PPM. But it will be right hand drive so it may not help.

If you can take a photo of your engine bay that shows space available.

[240zs30]

I see. I like the setup for the M30 I just wonder what it would look like for the M20 with the TB going in the other direction. Subscribed!

[Oshm]

Yes Indeed. For both the M20 and the M42.. Late spring early summer.

[240zs30]

Are you going to make anything for the M20?

[ubernasty]

So watch this space for all the data we will not be hiding anything.

All welded up a few trick bits internally but we can't show you everything ;)

:)....not even if we said please?

[MattMc]

Almost complete

[MattMc]

Surge tank for the BMW

[MattMc]

All welded up a few trick bits internally but we can't show you everything ;)

Next up drilling and tapping of the end plates for the end caps.

Then it's time to mount it.

[bimma360]

Make sure you have been Laminoved for optimum performance ;)

Hahah... had to look up laminova to know what you meant.