I recently decided to do a heating system overhaul, replacing my blower motor, blower motor resistor, and K7 fuse as they had all gone. Prior to this my car had been running beautifully, yet after replacing all of these parts and putting everything back together the engine will not stay running. The heater is now working fine (yay) and there are no problems with accessory power, but when turning the car over it nearly instantly dies. I am able to keep it somewhat running by stepping on the gas pedal and revving it high right as the car starts but it then proceeds to die right after. My guess is the issue has something to do with airflow, as I have fuel and spark. I may have accidentally unplugged something to do with the airflow but I have checked everywhere and can't seem to find anything. I have cleaned out the ICV and replaced the Fuel Filter within the last couple months. Any suggestions on solutions would be very appreciated.
edit: it was a vacuum hose out of place, got it after blowing air and smoke into the intake with a glove and straw.
Thanks!
edit: it was a vacuum hose out of place, got it after blowing air and smoke into the intake with a glove and straw.
Thanks!