rough idle...left maf unpluged when started car twice..by mistake

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Swanny
    replied
    Do the plugs need the little caps screwed off to leave the threads exposed?

    Leave a comment:


  • RondoAcapriccio
    replied
    Originally posted by dnguyen1963
    Unplug the neg cable for your battery for about one hour. Plug it back in and drive around a bit for the ECU to re-learn the new readings.

    ok, just my neg cable? also i was going change my plugs, and somehow got the wrong ones from pelicanparts....got wr8lc.... cant plug into wire set, checked two plugs, they both were super dirty..

    Leave a comment:


  • dnguyen1963
    replied
    Unplug the neg cable for your battery for about one hour. Plug it back in and drive around a bit for the ECU to re-learn the new readings.

    Leave a comment:


  • rough idle...left maf unpluged when started car twice..by mistake

    plugged my maf back in and now its still bad idle.... did i mess my engine up? do i need to reset ECU?
Working...