Hi, I’m working on an M30B35 swap on my 1984 318i and I’m at the point where I’m wiring everything in. I’ve got the C101 connected and everything plugged in (I think) but when I go to start the car theres no power at all. No lights turn on in the dashboard and theres no cranking. One thing that does work is when I jump the fuel pump relay on the engine harness I can hear the fuel pump running. Am I missing a ground somewhere as I only have the harness grounded at the strut tower at the moment? I also haven’t connected that small connector beside the ecu yet and before the swap there was no problem with the ignition. Not sure what the problem could be any help is appreciated!
Announcement
Collapse
No announcement yet.
M30 Swap No Power
Collapse
X
-
did you ground the engine to the chassis?318iS Track Rat :nice: www.drive4corners.com
'86 325iX 3.1 Stroker Turbo '86 S38B36 325
No one makes this car anymore. The government won't allow them, normal people won't buy them. So it's up to us: the freaks, the weirdos, the informed. To buy them, to appreciate them, and most importantly, to drive them.
Comment