I got Mounts!

[chrismkay3]

E34 oil pan is the only one that will clear the E30 subframe.

Thanks, guess i have to source a pan next, oh the things you do for a free b34 ;)

[Zacm829]

with b34 mounts, do you still have to run an e34 oil pan? or can you use the e24/28 pan?

E34 oil pan is the only one that will clear the E30 subframe.

[chrismkay3]

with b34 mounts, do you still have to run an e34 oil pan? or can you use the e24/28 pan?

[mw044]

Looks good Matti! What flange is that made for?

The one in the picture is with t4 flange. Can be made for t3 too.


I could make one like in the picture (but no wg pipes) for 600€ = ~800$ + shipping. For that price the manifold is made of big radius o.d 38mm pipes (like in the pic). Those have been proven to work well up to 150hp/cyl.

I don't know how that price sounds for you ? High or even too low ? :D

[QBANG]

Here are the pics....

[BimmerScreamer]

thats an interesting way to mount an engine on a stand

+1 for photos of the mounts

[weaksauce]

price?
I'd like to throw this on my car!

[QBANG]

Looks good Matti! What flange is that made for?

[LowR3V'in]

How much?

[mw044]

Holy crap, you got them already? Mine were in customs as of the 20th, I guess the tracking stops after that. I may have to run and check the mail today!

And you were worried...;)

Matti, you may end up making a few more sets of these!

Nice to hear that both packages found their way to US. Will happily do few more sets if needed.

As of right now the plan is to get the car up and running NA first. Work out any issues that come up and then install the EcarToys turbo kit (upgraded K27) and Warchip. I'm shooting for 14psi and around 400hp with the stock bottom end. Pretty sure I will move to the b35 head with ARP studs when we do the turbo.

QBANG... need for a turbo manifold ? Just made one for E30 + M30:

[Brian D]

BrianD,
Did you get your mounts yet?

Yep, picked them up this morning! They look pretty damn nice.

Now all I need is...everything else!

[QBANG]

BrianD,
Did you get your mounts yet?

Stereo,
Here are the cliff notes on my setup..... Its pretty standard.
1987 325i Ugly but cheap
M30b34 with a freshend b34 head... also have a b35 head if I want to go that way
G260/6 tranny
We are going to go with a stock head gasket and bolts for now.

As of right now the plan is to get the car up and running NA first. Work out any issues that come up and then install the EcarToys turbo kit (upgraded K27) and Warchip. I'm shooting for 14psi and around 400hp with the stock bottom end. Pretty sure I will move to the b35 head with ARP studs when we do the turbo.

[StereoInstaller1]

I got my B34 mounts today! They look good, nice welds. I got them from mw044 in Finland. I will post up pics as soon as I get a chance.

Post your setup, please!

[Brian D]

Holy crap, you got them already? Mine were in customs as of the 20th, I guess the tracking stops after that. I may have to run and check the mail today!

And you were worried...;)

Matti, you may end up making a few more sets of these!

[QBANG]

George,
I got them from user "mw044" here on the forum. Cost with shipping was right at $300. I will post up pics.