Started my m30 swap

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • 330icrazy
    replied


    Sent from my XT1526 using Tapatalk

    Leave a comment:


  • 330icrazy
    replied
    Alot of wiring diagnosis which was all fine. Ended up being that the battery had enough of a charge to turn over well but not enough for the sensors to start

    Sent from my XT1526 using Tapatalk

    Leave a comment:


  • 330icrazy
    replied
    Little bit of fire wall massaging the biggest problem for me was I had the transmission support backwards and and spent a day before figuring out

    Sent from my XT1526 using Tapatalk

    Leave a comment:


  • TimeMachinE30
    replied
    Wow.. that was a real cut to commercial kind of break. Fill us in on the details.

    How did you support the rad at the bottom? Firewall bashing.. massaging.. or none? Issues along the way? Wiring?

    Leave a comment:


  • 330icrazy
    replied
    Long time since an update but got the engine in and running still need to hook up exhaust and fans

    Leave a comment:


  • 330icrazy
    replied

    Did some cleaning of the engine bay today and cut the radiator suports and bent them down.

    Leave a comment:


  • Good & Tight
    replied
    Originally posted by Bearmw
    Those look like Good&Tight mounts.
    You are correct.

    Leave a comment:


  • TimeMachinE30
    replied
    Take lots of photos and notes... i will need to reference them one day.


    Good luck!

    Leave a comment:


  • Bearmw
    replied
    Those look like Good&Tight mounts.

    Leave a comment:


  • 330icrazy
    replied
    Originally posted by curtis_luu
    trans/shifter/driveshaft?

    Working on a workable combination for mine.
    Good luck on the swap!
    I believe that the trans is out of a E28 535i and I have read the 325 drive shaft will work. The shifter is a short shifter not sure of the make. Working on the engine bay now cleaning it up and painting it black, then comes the fun of gettting everything to fit.

    Leave a comment:


  • 330icrazy
    replied
    Originally posted by Mr. Burns
    awesome!
    what mounts are you using?

    you're going to likely need to bash in that firewall a little bit...
    Not sure who made the mounts they came with the swap. where does the firewall need adjustment?

    Leave a comment:


  • curtis_luu
    replied
    trans/shifter/driveshaft?

    Working on a workable combination for mine.
    Good luck on the swap!

    Leave a comment:


  • Mr. Burns
    replied
    awesome!
    what mounts are you using?

    you're going to likely need to bash in that firewall a little bit...

    Leave a comment:


  • wildstoats
    replied
    Looks like you're off to a good start!

    Leave a comment:


  • 330icrazy
    started a topic Started my m30 swap

    Started my m30 swap

    So I bought a 88 325 with a complete m30 and all the necessary goodies to do the swap and after driving the car for a year I am begining the swap!
Working...