Dyno Results

[EN318isPDX]

ya. the engine only has about 2k on a rebuild. plus the poly motor and trans mounts probably helped limit the drivetrain loss.

I am highly considering getting Poly engine mounts and tranny mounts.. hows the vibration.. ive heard its as bad as metal bushings but i highly doubt it.

[E30nate]

ya. the engine only has about 2k on a rebuild. plus the poly motor and trans mounts probably helped limit the drivetrain loss.

[BUDNUNTA]

Thats really good.
Most ive ever seen is 119.
Mine only made 116 with a metric mechanics exhaut, Jim C chip and K&N drop in. Ive also got 180k but still 220 to 225 psi on all four and only 12% leak down.
Your motor must be in excellent shape or really young.





Hunter

[DSP74]

That's pretty good for a 318. Those must be fun cars.

[E30nate]

So i got the chance to put my car on the dyno at school today, and i was quite impressed. my car is basically stock, with the exception of a pro formance ebay chip. it put down 128hp and 115 ft lbs. if i can figure out how to post a pdf file, i will post up the print out. i just thought it was pretty cool.