Announcement

Collapse
No announcement yet.

Deleted

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #76
    Deleted
    Last edited by Wanganstyle; 09-26-2020, 06:50 PM.
    OBD1 M54/M52TU swap as a M50b25

    Z4 non powered steering rack fits e30



    Euro e46 2005/6 320d 6mt gearbox into E30 with M20 hardy and beck 1985 327s engine

    Comment


      #77
      Originally posted by Wanganstyle View Post



      In regards to driveshaft used with 6mt this data is public on the Internet and known for years.

      One more varient; getrag branded from e90/92 early 2006

      It has transmission ears just like a zf5 or e46m getrag 6 speed, input just like e46 zhp with 22 fine spline and pilot bearing in the flywheel.

      So this "getrag" with ears would be the easiest to install since there are ears to bolt standard e30/36 Trans mounts onto.

      Remember this zf family of transmissions includes the diesel 320d 2005/6 e46 for sohc tilt and also getrag branded units in newer e90/92, z4, e60, etc.





      Do you know the specific years and engine I can source this transmission from?

      Comment


        #78
        Deleted
        Last edited by Wanganstyle; 09-26-2020, 06:50 PM.
        OBD1 M54/M52TU swap as a M50b25

        Z4 non powered steering rack fits e30



        Euro e46 2005/6 320d 6mt gearbox into E30 with M20 hardy and beck 1985 327s engine

        Comment


          #79
          It looks like it may be 23007626310

          Based on search results:

          IG: deniso_nsi Leave me feedback here

          Comment


            #80
            Has anyone done the e46 320d 6 speed swap on the M20 yet? I would like to find someone who has already made the shifter carrier and shifter linkage.
            My Garage
            2001 Z3 2.5i Steel Gray/Black (Lexi)
            1988 325ix Diamond Schwartz/Black (Izzy)
            1989 325i Cirrus Blue/Houndstooth (Stitch)
            Feedback

            Instagram: Stone.Hopkins

            Comment


              #81
              Deleted
              Last edited by Wanganstyle; 09-26-2020, 06:17 PM.
              OBD1 M54/M52TU swap as a M50b25

              Z4 non powered steering rack fits e30



              Euro e46 2005/6 320d 6mt gearbox into E30 with M20 hardy and beck 1985 327s engine

              Comment


                #82
                Hey Wanganstyle,

                I read almost all the post, we have plenty of those gearbox here in Costa Rica, specially the gearbox of the e90 320D. I tried to read your post on e30tech but I received an error from the website using this link http://www.e30tech.com/forum/showthread.php?t=110010. Do you have the write up in other place or here on R3V, I am really looking forward for this, my e30 260 gearbox is not a good condition.
                Jebc
                E30 '89 Zinnoberrot-138 325i M20B25
                E83 '05 Titansilber Metallic-354 X3 2.5i M54B25 6 Speed Manual - Daily
                Fa5 '07 Civic Si K20Z3 Brembo Brakes/Skunk2 Pro Series Manifold/BuddyClub Coilovers - Daily - Sold
                E36 '94 Alpinweiss III-300 325i (Euro Spec) M50B25TU with //M Aerodynamics Package - Sold
                E30 '89 Brillantrot-308 325iX M20B25 with 325iS M/T Swap - Sold

                E30 '90 Brillantrot-308 325i M20B25 - RIP
                https://www.facebook.com/jebc125
                sigpic

                Comment


                  #83
                  Originally posted by stonea View Post
                  Has anyone done the e46 320d 6 speed swap on the M20 yet? I would like to find someone who has already made the shifter carrier and shifter linkage.
                  Austin Sera is making carriers and linkages if you want to buy one.
                  2006 GMC Sierra 2500HD 4WD LBZ/Allison
                  2002 BMW M3 Alpinweiß/Black
                  1999 323i GTS2 Alpinweiß
                  1995 M3 Dakargelb/Black
                  - S50B32/S6S420G/3.91
                  1990 325is Brilliantrot/Tan
                  1989 M3 Alpinweiß/Black

                  Hers: 1996 Porsche 911 Turbo Black/Black
                  Hers: 1988 325iX Coupe Diamantschwartz/Black 5spd

                  sigpic

                  Comment


                    #84
                    It's funny you mention him, I just found him on FB the other day and have been talking to him about it.

                    Sent from my Pixel XL using Tapatalk
                    My Garage
                    2001 Z3 2.5i Steel Gray/Black (Lexi)
                    1988 325ix Diamond Schwartz/Black (Izzy)
                    1989 325i Cirrus Blue/Houndstooth (Stitch)
                    Feedback

                    Instagram: Stone.Hopkins

                    Comment


                      #85
                      Deleted
                      Last edited by Wanganstyle; 09-26-2020, 06:17 PM.
                      OBD1 M54/M52TU swap as a M50b25

                      Z4 non powered steering rack fits e30



                      Euro e46 2005/6 320d 6mt gearbox into E30 with M20 hardy and beck 1985 327s engine

                      Comment


                        #86
                        Revisiting this project again and thinking of the path less traveled -- a 6-speed ZF from a Z4M into a S54 MZ3.

                        Will the OEM braces as mentioned by the OP work for this setup?

                        Comment


                          #87
                          Deleted
                          Last edited by Wanganstyle; 09-26-2020, 06:16 PM.
                          OBD1 M54/M52TU swap as a M50b25

                          Z4 non powered steering rack fits e30



                          Euro e46 2005/6 320d 6mt gearbox into E30 with M20 hardy and beck 1985 327s engine

                          Comment


                            #88
                            Originally posted by Wanganstyle View Post
                            Modern e90 generation "getrag branded " zf6 speed. Both getrag and zf parts are in here, this one is branded getrag.


                            Looking for this. Any ideas where i can source a good, low mileage one? Thanks!

                            Comment


                              #89
                              Originally posted by Goupan View Post
                              Looking for this. Any ideas where i can source a good, low mileage one? Thanks!


                              Search
                              OBD1 M54/M52TU swap as a M50b25

                              Z4 non powered steering rack fits e30



                              Euro e46 2005/6 320d 6mt gearbox into E30 with M20 hardy and beck 1985 327s engine

                              Comment


                                #90
                                Hello folks, this thread may be a bit old, so sorry for reviving it (if it is meant to stay dead, let me know)


                                Please note of the following info regarding the 6 speed transmissions:


                                Info on here regarding the GS6-37BZ/DZ is correct. Nothing to add to it.
                                Except its maximum torque - 350nm (258ft lbf)



                                However I noticed some people are referencing the Getrag transmissions:
                                The code for it is GS6-17BG (B = Petrol (Gasoline) G = Manufacturer GETRAG)
                                There were no DG models (D = Diesel) as the transmission max rated torque is 320nm (236ft lbf)


                                I contacted BMW to get the info as I wanted to get a 6 speed transmission for my S50B32 (EU) engine.


                                You can probably exceed the max torque on the transmissions - Everyone does it, but for a couple of dollars more I personally opted for the GS6-37


                                The GS6-17's were placed in most post E90 cars (Including E60's, E81-87's)


                                They were primarily used on the following engine sizes (Including some turbo models) 2.0, 2.5, 2.8 (E.g. 120i (E8x), or 325i(E9x/F3x) or even later 528i(E6x etc) (but had a weird setup for the auto engine stop start, be careful not to get one of those transmissions)

                                Comment

                                Working...
                                X