Well as some might remember i bought a e30 turbo some time back and it wasnt exactly as described. Today i was changing the guibo and decided to change out the throw out bearing and rear main seal as well.
I took tranny down and was expecting to see a Southbend stage 3 clutch kit as he had advertised claiming it was good for 600wtq. Instead i found a sachs clutch with Southbend pressure plate. So..well not surprised. Going to look for a clutch and was wondering if anyone had any advice...im pushing alot of power.
Ive put a total of about 900 or so miles on it and alot of it was at 27lbs of boost and running it hard with no problems or blown head gaskets...of course ive been using c16 1/1 with 93 pump. Need a clutch if anyone can recomend something i would appreciate any ideas...
I took tranny down and was expecting to see a Southbend stage 3 clutch kit as he had advertised claiming it was good for 600wtq. Instead i found a sachs clutch with Southbend pressure plate. So..well not surprised. Going to look for a clutch and was wondering if anyone had any advice...im pushing alot of power.
Ive put a total of about 900 or so miles on it and alot of it was at 27lbs of boost and running it hard with no problems or blown head gaskets...of course ive been using c16 1/1 with 93 pump. Need a clutch if anyone can recomend something i would appreciate any ideas...
Attached Files