Announcement

Collapse
No announcement yet.

Shifter slop

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • brickdaddy
    replied
    Originally posted by Cayoncrusier93 View Post
    If you want the two little washer I think I have a pair I can send you. Let me know.
    Yes please. pm'ing you now

    Leave a comment:


  • Cayoncrusier93
    replied
    Originally posted by brickdaddy View Post
    Hello, i have a 260/5 out of an 88 325i im using to do my 5sp swap. It has quite a bit of slop in the shifter. It seems to be from where the selector rod meets the rod going into the transmission. It looks like there's a bushing missing, but when i looked it up on realoem, all it shows is 2 black o-rings and a plastic washer. Im wondering if theres an aftermarket bushing i can buy or if anyone is familiar w this problem and knows a solution? TIA
    If you want the two little washer I think I have a pair I can send you. Let me know.

    Leave a comment:


  • LowR3V'in
    replied
    You're right.
    Probably just put in a washer to take up the slack on both ends.
    There's bushings from IE but it won't take up the slack.

    Leave a comment:


  • brickdaddy
    started a topic Shifter slop

    Shifter slop

    Hello, i have a 260/5 out of an 88 325i im using to do my 5sp swap. It has quite a bit of slop in the shifter. It seems to be from where the selector rod meets the rod going into the transmission. It looks like there's a bushing missing, but when i looked it up on realoem, all it shows is 2 black o-rings and a plastic washer. Im wondering if theres an aftermarket bushing i can buy or if anyone is familiar w this problem and knows a solution? TIA
Working...
X