Supercharging my M60
Collapse
X
-
I would not have swapped from a turbo m20 to an m60. Not a potent enough set-up to switch to IMO.
Hope the ports line up, otherwise you'll need to fabricate some short runners, which will likely raise the set-up and cause hood clearance issues.Leave a comment:
-
-
Sub'ed.
Jaguar XJR? What's that about? Did they use a BMW m60 in it or something?Leave a comment:
-
I decided to keep it
I will soon have all these answers.Leave a comment:
-
Interesting... wondering what hood clearance is gonna be like (also rad clearance). Does the supercharger pulley line up with everything else, or do you have to get a new 'dual belt' crank pulley?Leave a comment:
-
Yup, that supercharger is one option I considered before going NA. Good luck, and share results!!!
http://www.ebay.de/itm/Kompressor-Ki...item4ac932be90
This is the one I was looking atLast edited by Yorl; 09-09-2013, 04:50 PM.Leave a comment:
-
-
I'm in for this.
Look proper. The Jag V8 is so similar to M62s it's not even funny.Leave a comment:
-
There is also some kind of turbocharger package for M6x from factory as M6x variants were used in Bentley Arnage (?) in the '90s ;)
Space will, of course, be an issue in E30 body but everything is doable..Leave a comment:



Leave a comment: