e30 5.0 turbo (Drift project)

danval · 06-08-2015, 11:34 PM

Originally posted by TRAK WDW

This x100

Nice build!

thanks brotha!

danval · 06-08-2015, 11:33 PM

Originally posted by e30_302

I'd add an Accusump too.

ill look into that! gotta finish some other stuff first. lol

danval · 06-06-2015, 05:31 PM

Attached Files

TRAK WDW · 06-05-2015, 08:14 PM

Originally posted by e30_302

I'd add an Accusump too.

This x100

Nice build!

e30_302 · 06-05-2015, 05:59 PM

Originally posted by danval

Thanks. I got some baffles going on around the pickup

I'd add an Accusump too.

danval · 06-05-2015, 01:49 PM

Originally posted by jalopi

just make sure to keep it under 6k rpms, from what i've read on all the ford forums that seems to be the magic ticket to keeping stock blocks from splitting when boosted

Dang! Good advise!

jalopi · 06-05-2015, 12:10 PM

just make sure to keep it under 6k rpms, from what i've read on all the ford forums that seems to be the magic ticket to keeping stock blocks from splitting when boosted

danval · 06-05-2015, 10:22 AM

Originally posted by jalopi

there's a turbo manifold that'll fit much better than what you currently have going on

http://www.r3vlimited.com/board/showthread.php?t=338536

also, i hope you have access to some extra t5's, no way i see that ending well :)

Thanks, I fabricated my own motor mounts so I'm not sure if other stuff will clear that area. I will Fab my own headers down the road anyway. Hahahhah I know! I have my setup to max at 10psi, but with 5 I've been getting plenty of torque to slide the crap out of this coke can! Thanks brotha!