Oil pressure light/Gauge Install

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • asubimmer
    replied
    Originally posted by NC325iC
    how does that work
    lol

    Leave a comment:


  • blownbrick245
    replied
    oil is hotter than normal something not good is happenning

    Leave a comment:


  • NC325iC
    replied
    how does that work

    Leave a comment:


  • asubimmer
    replied
    oil pressure is nice but oil temp is >. if your pressure drops then you are screwed, w/ the temp gauge you can see it coming instead of when its too late.

    Leave a comment:


  • blownbrick245
    started a topic Oil pressure light/Gauge Install

    Oil pressure light/Gauge Install

    hey guys, Ive got a few questions. As most of you know the 318 has a dumb problem of busting the oil pressure switch(which i didnt know about and put oil in it and checked and it was a little over maxed, forgot to put the cap back on and car ran like shit till i did, so it has oil pressure.)and mine is leaking pretty good from there. I was curious what would it entail to install a oil pressure gauge that i have sitting around, what is the normal pressure for the m42 to run. It is an older sunpro gauge i had bought for my monte carlo ss, its got the sender, wiring and gauge(its white faced unfortunatley but ohwell). Im going to be turboed soon as well and would be good to have this. Do i just install a T between the bottom of the oil filter housing, intall the new pressure switch and install the sender for the gauge on the open end of the T? thanks!
    -Max
Working...