rear wheel bearing DIY

[lordofthewaters]

30mm

rear wheel bearing replacement

[Mr.sexymorningvoice]

use the sir tools kit. works like a charm.

? what is the sir tools kit?

[e30sd]

it's a 32 or a 36mm, cant remember. use the sir tools kit. works like a charm.

[Mr.sexymorningvoice]

what size is the nut? we have impacts all the way up to 1inch, and they have like 1800 ft. lbs in reverse...dozer tools FTW

[E30FreaK89]

Because your impact most likely will not be able to break the nut loose.

-Erik

my impact guns got 1200 ftp of reverse power.. i think thats enough to get off that nut!

[erik325i]

why are they saying to put the car back on the ground to pull out the stub? When i do mine....why couldn't i just leave it on our lift, grab a 1/2in impact, and buzz that mother f'er off?

Because your impact most likely will not be able to break the nut loose.

-Erik

[Mr.sexymorningvoice]

why are they saying to put the car back on the ground to pull out the stub? When i do mine....why couldn't i just leave it on our lift, grab a 1/2in impact, and buzz that mother f'er off?

[ZiMMie]

http://www.teamdfl.com/bmw/e30/rear_wheel_bearings/index.html

[alane]

anyone know of a good rear wheel bearing DIY artical? any help would be good, thanks.