Announcement

Collapse
No announcement yet.

Reproduction DTM wheel?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ludwig
    replied
    damn, i wish i hadn't clicked on that link
    the golden wheels on that black car look stunning! And the kevlar bonnet also looks perfectly made.

    Leave a comment:


  • Victell
    replied
    They are available in 4x100 as well.

    Leave a comment:


  • flyboyx
    replied
    there was a guy on s14 that was building hubs. i can't remember specifics but they were crazy pricy too. maybe 4k a set?

    Leave a comment:


  • 02fanatic
    replied
    Originally posted by Ray Smoodiver View Post
    No different to setting up any other E30? The only difference is in how the wheels are mounted.
    I understand that, but I've read others much more knowledgable than me say that setting up the mounting hardware to run DTM style wheels on a street car is not so easy, and can be expensive.

    I'd like to see some technical information on how to do this conversion, along with relative costs for the parts.

    Leave a comment:


  • Victell
    replied
    We can also make in 17", and 5x120 fitment

    It sounds like they have blanks that they drill to 5x120. If that's the case then they may do a 4x100 if you ask/pay very nicely

    Leave a comment:


  • Ray Smoodiver
    replied
    No different to setting up any other E30? The only difference is in how the wheels are mounted.

    Leave a comment:


  • 02fanatic
    replied
    What a great look! Gotta love it!

    But, I hate to even think how much the spindles and hubs cost! That wheel and suspension setup has to be expensive for a street car to run. If anyone has information on setting up the suspension to run these wheels with approx. cost that'd be a good read.

    Leave a comment:


  • M-technik-3
    replied
    Originally posted by Victell View Post
    Is this legit? Did somebody finally reproduce the DTM wheel?

    http://www.m3motorsport.co.nz/products/wheels/dtm-wheel

    YES it is from last I read going into production.

    Leave a comment:


  • IronFreak
    replied
    Oh I'm not denying that....I drooled on his site for several minutes. Carbon EVERYTHING. Just WAY out of my price range.

    Leave a comment:


  • oliver.r
    replied
    his reproductions are as legit as you possible can get

    he offers the wheels in whatever size or offset you want, currently developing a 5x120. this guys is all over s14.net

    Leave a comment:


  • IronFreak
    replied
    After I asked that question I looked at his other products......I came to the conclusion that per set was entirely to cheap....

    Leave a comment:


  • oliver.r
    replied
    per wheel

    Leave a comment:


  • IronFreak
    replied
    is that price per wheel? or set?

    Leave a comment:


  • Todd Black 88
    replied
    And it's the real deal Pirro DTM M3.

    Check the web page for all the replica DTM parts he makes. They are amazing.

    Leave a comment:


  • e30m3s54turbo
    replied
    That DTM m3 looks bad ass!

    Leave a comment:

Working...
X