Z4 rear hub

[MR_SAZ]

40mm piston on rear caliper

Guys I really want to try and get 40mm pistons in my rear calipers to balance out my bbk up front.
I know of the e32 735i caliper will bolt directly on to my TI rear but that's a 38mm piston.

Looking at what's available on the OEM side, e34 540i,M5 /e32 740,750i/ e36m3 are all 40mm single Pistons.

Will these adaptor allow me to achieve this ??

I also want full use of my e-brake or hand brake. Been looking into e32 rotors and 1 series rotors.

I've bought some e82 rotors to try out and for laughs e87 blue calipers to try make something
Work... Any help is appreciated in advanced.
Sash

[ngampleh]

Guys I really want to try and get 40mm pistons in my rear calipers to balance out my bbk up front.

I know of the e32 735i caliper will bolt directly on to my TI rear but that's a 38mm piston.



Looking at what's available on the OEM side, e34 540i,M5 /e32 740,750i/ e36m3 are all 40mm single Pistons.



Will these adaptor allow me to achieve this ??



I also want full use of my e-brake or hand brake. Been looking into e32 rotors and 1 series rotors.



I've bought some e82 rotors to try out and for laughs e87 blue calipers to try make something

Work... Any help is appreciated in advanced.

Sash

hi Sash,

what is your currently setup or parts that you have?
whats rotors diameter that you aimed to make nice bias for you?

my adapters is for e46 325/330i with z4 hubs..
which, e46 325 is 40mm caliper pistons and 294x19 rotors

[whodwho]

Guys I really want to try and get 40mm pistons in my rear calipers to balance out my bbk up front.
I know of the e32 735i caliper will bolt directly on to my TI rear but that's a 38mm piston.

Looking at what's available on the OEM side, e34 540i,M5 /e32 740,750i/ e36m3 are all 40mm single Pistons.

Will these adaptor allow me to achieve this ??

I also want full use of my e-brake or hand brake. Been looking into e32 rotors and 1 series rotors.

I've bought some e82 rotors to try out and for laughs e87 blue calipers to try make something
Work... Any help is appreciated in advanced.
Sash

Seen your post on the ti thread as well, which trailing arms are you running?

These also works with e36 M3 rear rotor and calipers but needs a little update for the parking brake.

[ngampleh]

Seen your post on the ti thread as well, which trailing arms are you running?

These also works with e36 M3 rear rotor and calipers but needs a little update for the parking brake.

I didnt noticed that Mr. SAZ used ti trailing arm..
if so, than I cant help him further more..
thanks for replied it, Keith ...

[ngampleh]

I understand you bro. No worries ill hold off on buying some, my build still needs alot of work everywhere else. I plan on getting a e46 m3 donor probably crashed so I figured if I could use the parts ill save money but i wouldnt have a problem using 330i rotors for the rear, but for the front I think the e46 m3 fronts would be ideal.

If your prototype works with the front e46 m3 once you get them ill buy a complete set from you it will be better for me too with lower shipping costs lol.

Thanks, looking forward to your email.

email sent !

[MR_SAZ]

Yeah I'm running TI, trailing arms... I heard that e46 330i is a 42mm piston and I'm running a bbk up front using e46 m3 rotor and e31 840csi brembo's.
Just want to fix this bloody rear once and for all ...
I'm looking at 128i rotor as it apparently works (as does the e85 Z4) brake rotor, bonus is that hey both use the 160mm hand brake or e-brake shoes.
I'll just need to make and adapter and correct the dust shield.
I'll keep you all posted. I think the rear rotor on a 128i are 300x20mm
Sexy ...

[Nelsson]

.

When is your next batch getting send? Do you know what the shipping cost is to Denmark?

[ngampleh]

Yeah I'm running TI, trailing arms... I heard that e46 330i is a 42mm piston and I'm running a bbk up front using e46 m3 rotor and e31 840csi brembo's.
Just want to fix this bloody rear once and for all ...
I'm looking at 128i rotor as it apparently works (as does the e85 Z4) brake rotor, bonus is that hey both use the 160mm hand brake or e-brake shoes.
I'll just need to make and adapter and correct the dust shield.
I'll keep you all posted. I think the rear rotor on a 128i are 300x20mm
Sexy ...

contact Max399 for more discussion, I cant talk much with Ti trailing arm..

http://www.r3vlimited.com/board/showthread.php?t=306268

When is your next batch getting send? Do you know what the shipping cost is to Denmark?

will ready to ship next 2 weeks..
shipping to Denmark
- Register/Priority = USD 12
- Express (EMS) = USD 38

I checked that price on web,
I will double check on post office

[Nelsson]

contact Max399 for more discussion, I cant talk much with Ti trailing arm..

http://www.r3vlimited.com/board/showthread.php?t=306268

will ready to ship next 2 weeks..
shipping to Denmark
- Register/Priority = USD 12
- Express (EMS) = USD 38

I checked that price on web,
I will double check on post office

Sign me on. are you using paypal?

[ngampleh]

Sign me on. are you using paypal?

will do..!
yes, I have paypal account...
I will pm you

[ngampleh]

>>> 4th batch ORDERED <<<
1. E30Logic - ordered
2. Nelsson - ordered
3.
4.
5.

Next batch 5 sets production soon... (next week ready to ship)
price increased 135.00 + shipping
(shipping is not included now)

shipping to States are
10.00 - Priority Mail with tracking number (2-3 weeks)
20.00 - Express Mail with tracking number (5-6 days)

[ngampleh]

brackets material

These brackets made from Aerospace Aluminum Alloy 7050-T6751

This alloy is used in aircraft structural parts. The alloy has characteristics of high strength coupled with good resistance to
exfoliation and stress corrosion cracking. The alloy also has good fracture toughness and fatigue resistance.

Material made by KAISER Aluminum, Trentwood, WA - USA


here links for more information about the material..

http://www.kaiseraluminum.com/customers/products/plate-sheet-coil/

https://online.kaiseraluminum.com/depot/PublicProductInformation/Document/1003/KaiserSelect_Aerospace_Plate.pdf

material properties

https://online.kaiseraluminum.com/depot/PublicProductInformation/Document/1016/Kaiser_Aluminum_7050_Sheet_Coil_and_Plate.pdf

[Dyagciog]

Add me...


Sent from my iPhone using Tapatalk

[ngampleh]

>>> 4th batch ORDERED <<<
1. Dyagciog - ordered - paid - shipped
2. Nelsson (2 sets) - ordered - paid - shipped
3.
4.
5.

5 sets finished and ready to ship !!
price is 135.00 + shipping
(shipping is not included now)

shipping to States are
10.00 - Priority Mail with tracking number (2-3 weeks)
20.00 - Express Mail with tracking number (5-6 days)

[MrJunky]

Add me. One set please.