Brake Problem
OK here is the story,
in February i replaced the front brakes with zimmermann cross drilled rotors and the pads are cool carbon the back brakes got no attention. one track event later brakes are still fine no problem. In March i replaced the spring and shock (bavauto spring and bilstein shocks) the brakes started to grind as i would stop I cleaned, de-glazed and replaced the shims but it didnt stop the grinding. This month the brake M/C was upgraded to a 25mm and the lines are braided steel from pelican parts brake fluid is Super Blue racing fluid this is the most recent change to the car and now the brake lining light comes depending on how hard the bake pedal is held at and it will pulsate when i come to a stop again this depends on how hard i push the brakes. The pads still have a lot of life left and the grind only comes from the front
Any suggestions or tip on this would be cool
in February i replaced the front brakes with zimmermann cross drilled rotors and the pads are cool carbon the back brakes got no attention. one track event later brakes are still fine no problem. In March i replaced the spring and shock (bavauto spring and bilstein shocks) the brakes started to grind as i would stop I cleaned, de-glazed and replaced the shims but it didnt stop the grinding. This month the brake M/C was upgraded to a 25mm and the lines are braided steel from pelican parts brake fluid is Super Blue racing fluid this is the most recent change to the car and now the brake lining light comes depending on how hard the bake pedal is held at and it will pulsate when i come to a stop again this depends on how hard i push the brakes. The pads still have a lot of life left and the grind only comes from the front
Any suggestions or tip on this would be cool
