15" or 16" Wheels that Fit UUC BBK

[aventari]

So I just ordered this kit with the 15% off special.

But now I just looked around like an idiot and my 15x8 TR C1s won't fit. :( So has anyone run them with a 12 or 15mm spacer and fit them? Would that be okay for track use?

[ttrousdell]

Would be interested to see if anyone has tried to run these with 15x8 et25 Enkei 92s and if so would spacers be required.
Filament guide if anyone wants to print it to scale and answer some of our questions.

http://www.uucmotorwerks.com/files/E30_BBK_WHEEL_FITMENT_DIAGRAM031710.pdf

[ttrousdell]

I've tried a redrilled 17" Style 5 and its no where near close. You would need a 30-40mm spacer, thus making this wheel unusable with out some flairs.

False. I am running 17" style 5s filled and drilled. You can run a 10mm spacer but will have to hit the caliper with a file slightly. A 1/2"(12mm) spacer will clear the wheels completely. I know this first hand since i went through this to get them to fit on my car.

[matthugie]

How about BBS RX 17x7.5?

I had those in et35 with a 10mm spacer (for general e30 fitment), and the brakes cleared with plenty of room left..

[e30_302]

Anybody know about XXR 002's in 15x9?

[vitiokas95]

How about BBS RX 17x7.5?

[Hawkmec]

I'm currently running Kosei k4R 15x8 et.20 with 205-55-15 and a 3mm spacer to clear the front strut. I tried MSW 15x7 et.22 and don't clear caliper it requiers a 15mm spacer at least to be safe.

[JamesE30]

Well I mentioned this earlier in the thread. But now they are fitted i can say that OZ racing Type 146A (Commonly referred to as OZ Alpinas) will fit with a 3mm spacer. They are super close though, so you may want a 5mm but you 100% would need to roll your guards if lowered and using 205's.

They are 15x7, +12
Tyres are 205-50-15, TOYO R1R.
3mm spacer up front.

[iilou23ii]

How about 17 in OZ futuras? Will they fit?

[Link]

Interesting, hope to go to the kit when brakes are ready for replacing. Sub'd

[GThomas]

Will 17inch style 5's fit with a spacer?

I've tried a redrilled 17" Style 5 and its no where near close. You would need a 30-40mm spacer, thus making this wheel unusable with out some flairs.

[iilou23ii]

15" or 16" Wheels that Fit UUC BBK

Will 17inch style 5's fit with a spacer?

[firemanory]

Slightly off topic, but any UUC BBK owners experience front clunking noises when going from reverse and then braking, and then forward and braking? Only does it once.

I have also noticed that the rotor hats have a small gap around the hub, which leads me to believe that it might be the rotor hat moving slightly and then contacting other side of rotor.

Anyone else have a gap around your rotor hat and hub assembly?

[GThomas]

Anyone fit a set of 16 inch OZ Futuras? I really want those.

Haven't personally tested these, but most 16" 3 piece wheel's bolts touch the caliper without using a large spacer.

[iilou23ii]

Anyone fit a set of 16 inch OZ Futuras? I really want those.