BBK: www.300mm.de

[StereoInstaller1]

Sounds good. That setup looks great! could 300mm fit under 15" wheels?

He says his smallest kit is made for 16's.

I was wondering the same thing for my sons car!

Luke

[2002maniac]

BTW, I emailed him. He is on vacation until the 28th. He has no US dealers...maybe I will become his first!

Do I smell a GB?

Luke

Sounds good. That setup looks great! could 300mm fit under 15" wheels?

[StereoInstaller1]

WTF?! This guy has obviously spent alot of effort putting together this kit and you plan on stealing his ideas?

Either buy his kit or come up with something on your own.

That is kinda where I am. I figure I should be able to get a set of rotors for around $120, have them modded for about $50 (pure conjecture at this point) a pair of E34 540i calipers and saddles for about $150, a set of Pagid's, a pair of sensors, G10 nuts/bolts and buy his brackets for $280ish...be around $650 or so. I am way cool with that!

BTW, I emailed him. He is on vacation until the 28th. He has no US dealers...maybe I will become his first!

Do I smell a GB?

Luke

[2002maniac]

Guys lets put some money together buy 1 bracket and then make more. The only problem would be finding rotors.

WTF?! This guy has obviously spent alot of effort putting together this kit and you plan on stealing his ideas?

Either buy his kit or come up with something on your own.

[Vedubin01]

Well I was going to offer the brackets by their own. Then one could source the kit. I would provide part numbers and you can find the best sale price on the calipers and rotors. I have to see how much interest there would be for the parts and go from there. But if you look there is not a BBK for the E30 that is under the $1k mark that I have seen. Well unless you have tools to make the parts and or use used calipers.

[beamR X]

I am in the process of making some brackets for sale. We have them designed and have to find time to have them milled. These would use the Willwood brake calipers. Im trying to make a kit for sale for around the $600 to $700 range.

Ill post some more later.

Including: rotors, pads, sensors etc I assume, at that price range...

[Vedubin01]

Guys lets put some money together buy 1 bracket and then make more. The only problem would be finding rotors.

I am in the process of making some brackets for sale. We have them designed and have to find time to have them milled. These would use the Willwood brake calipers. Im trying to make a kit for sale for around the $600 to $700 range.

Ill post some more later.

[StereoInstaller1]

Must mean your a dork too since you waste your time asking then turn around and say are these any good.

WTF? Never have I asked if they are "any good"...the goodness is obvious.
Lets see...what did I say?

Ed, that is a new one on me...but DAYUM, that is cool. Have you driven it? How is the feel? What have you done for the MC? Can you show us your adapters, and is making the adapters easy enough for the average guy to handle? If not, do you have plans to market? If so, I need new rotors anyway, so sell me a set, quick!

BTW, Did those rotors come drilled like that?

I guess I basically need to know everything about this setup. Terrific job!

Thanks for sharing your idea!

Luke

So as far as "dorkiness" and "wasting my time" the award goes to you. Try and be constructive, or GTFO of my posts.

Ask AC Nico to post his brakes on his touring he has them on his car.

Great. I am sure they are wonderful. Excellent design and all. I want to BUY the fucking things, not just sit around and talk about them. I have been waiting to get the fugly "boy racer" drilled Zimmermann rotors off of my car since I bought it, looking for options.

BTW, did you ever get your amp "hooked up"? Did you figure out how to turn the "Loud" on? Remember who helped you? Make sure you never crap on a thread of mine, OK?

Luke

[SchnellerVert]

[SchnellerVert]

Hey guys, anyone see this site?

http://wp1016621.wp027.webpack.hosteurope.de/fotost/f01534/f01534.htm

There is a thread over on e30dork.com about it.

The fucking things have TUV approval! Safe, big, cheap.

Ayone have any E34 540i calipers and brackets?

Google translated page:

http://translate.google.com/translate?hl=en&sl=de&u=http://www.300mm.de/&sa=X&oi=translate&resnum=1&ct=result&prev=/search%3Fq%3D300mm.de%26hl%3Den%26hs%3DA1T%26lr%3D%26safe%3Doff%26client%3Dfirefox-a%26rls%3Dorg.mozilla:en-US:official%26sa%3DG

Luke

Must mean your a dork too since you waste your time asking then turn around and say are these any good.

Ask AC Nico to post his brakes on his touring he has them on his car.

[Beej '86 325es]

I'm surprised they have as much info as they do on the it online. It's like, why buy from them if you know what parts you need. But yeah, I wish that diagram of the adapter was bigger... :)

[HalexH]

Guys lets put some money together buy 1 bracket and then make more. The only problem would be finding rotors.

[StereoInstaller1]

Sorta...

I'd say 100-150 CAD.

So that is like $200,000 USD, right?

(just kidding)

Luke

[beamR X]

So, like, what are you saying? If you had a spec, you could mill them?

If so, what do you think they would be worth? What steel would you use?

They are about $250/pr with g.10 bolts, plus shipping from the mudderland. I didn't think that was such a bad deal.

Luke

Sorta...
I would not mill them myself, but my machinist friend would...
I would say it would cost me 1/3 or so of the cost.
I'd say 100-150 CAD.

[StereoInstaller1]

If I only had a better resolution pic of that adapter with the readable numbers...

So, like, what are you saying? If you had a spec, you could mill them?

If so, what do you think they would be worth? What steel would you use?

They are about $250/pr with g.10 bolts, plus shipping from the mudderland. I didn't think that was such a bad deal.

Luke