we have a winner..
this turned out to be a bad rear u-joint in my driveshaft...
whodathunk>?
one new driveshaft later... smooth ride.. (the new shocks and springs help too)
bad wheel bearing?
Collapse
X
-
I would say it belongs in the engine & drivetrain forum (transmission and driveline subforum)Leave a comment:
-
WTF.. Why all the moved threads from General Tech?
I certainly don't consider it a specific Brakes, Subframe or Arm problem.
Someone is getting move happy.Leave a comment:
-
That's it ??? $210 for the bearing labor?
How many hours does that turn out to be?
(this question is for anybody)Leave a comment:
-
DaveCN,
You called it, it was the left rear bearing. Bought a couple of bearings from BMA for about $30. each, took it to my mechanic and he replaced the left bearing. $210. bucks later...smooth as silk with no whoomp, whoomp or vibration. Thanks for everybody's postsLeave a comment:
-
what about a metallic spinning noise? could it be a wheel bearing or could it be the metal backing shield rubbing against the rotor or something?Leave a comment:
-
leftI've got somewhat the same issue. No real noise other then the "whomp, whomp, whomp" sound. When I turn to the left..no noise or vibration. But when I turn to the right, all hell brakes loose!
Took it to my mechanic, he scoped it on the rack with the stethescope but could not pinpoint it. He checked the rear end, both inner brake hubs, tranny and nothing. Seems like there has to be a load on it before it vibrates and hums. Highway driving.. as I increase rpms the vibration increases.
Has anyone got an idea as to which bearing it would be if it whoomps as I turn right? Whoomp, whoomp, frickin whoomp. :twisted:Leave a comment:
-
Wheel Bearing issue
I've got somewhat the same issue. No real noise other then the "whomp, whomp, whomp" sound. When I turn to the left..no noise or vibration. But when I turn to the right, all hell brakes loose!
Took it to my mechanic, he scoped it on the rack with the stethescope but could not pinpoint it. He checked the rear end, both inner brake hubs, tranny and nothing. Seems like there has to be a load on it before it vibrates and hums. Highway driving.. as I increase rpms the vibration increases.
Has anyone got an idea as to which bearing it would be if it whoomps as I turn right? Whoomp, whoomp, frickin whoomp. :twisted:Leave a comment:
-
If it sounds like a metallic squeel or like a small gear thats going way too fast it has to be the wheel bearing. Let us know if you did it yourself. Mine needs one but Ive been putting it back.Leave a comment:
-
im hoping it is. since that is the cheaper part too.
i believe i could just about do it myself, plus could a bearing puller be rented?
what i may do is.. have the shop look at it and determine if it is in fact the wheel bearing, i will then take the car home and pull it all apart..
and hopefully be able to take them the drive flange and have them swap the bearings for me.
(is this possible? is the bearing pressed intothe drive flange , or do i have to take them the entire trailing arm?)
i guess i will also do the trailing arm/subframe bushings at this time. (along with replacing all the shocks/springs and mounts)
Since i cannot afford a new cv axle too, can i just get some replacement boots for them since they are disconnected?
thanks for the helpLeave a comment:
-
I can almost guarantee it's the wheel bearing, especially if it's on one side. It's only a $40 part, but you need a wheel bearing puller to remove/install it.Leave a comment:
-
alright guys,
ive looked into it more, but I have no clue.
Its gotta either be the wheel bearing or the cv axle.
its to the point whereit has goten worse, and im about to take it and pay a shop to tell me what it is.
I KNOW the smart people on this board would be able to tell me though, and save me 80 dollars.
I can try my best to get a vid of the sound if needed..
Can anyone else offer any more ideas?
with e30s as old as they are now, i know im not the only one have a wheel bearing or something go bad?
please help.
thank you.Leave a comment:
-

Leave a comment: