Massive Sport kit installed

[Massive Lee]

Greg. Right?

You could probably check the Sport kit (as pictured in the initial post) or the newer 280mm kit. Download the Sport kit's profile here.

http://massivebrakes.com/files/profile_e30_318-325_front_300_21.pdf

Or email me for a profile of the 280mm kit.

I currently have a silver Sport kit that was assembled but never installed as customer changed his mind and exchanged it for a 280mm kit. It comes with UL rotors and I will include free pads. Otherwise, the slotted rotors are extra.

[vivalegreg]

hey massive will any of your brake setups fit on my es with 16x8 sportmax 501s?? im in the market for a bbk

[Beej '86 325es]

I thought it was. I already had my backer plates removed, which is probably the hardest part. The only thing I had trouble with was figuring out which adapter to use and how...but that's only because I didn't read the directions thoroughly enough to see that I needed to cut off the upper mounting hole for the backer plate...and that only took 2 minutes with a cut-off wheel.

[RickSloan]

so the install on these is very simple?

[Massive Lee]

Fit is very tight in 15" wheels, but is easier on 16" and 17" rims. Usually, the "conflicting" area is the round transition between the back of the spokes and the barrels.

The Superlite are indeed bigger and not as easy to fit as, say, the smaller Dynalite, but they offer much bigger/thicker brake pads, more stiffness and a superb selection of brake pads, especially for track use. Honestly, the Superlite calipers are equally good as AP Racing's CP52000 series.

[Beej '86 325es]

Thanks for the compliments, guys - and thanks for the help with the kit, Lee. You're right, the calipers are very big, much wider than I pictured.

I'm swapping my bolt on wheel spacers for some traditional spacers, that should be here later this week. Hopefully I'll have some pictures up with the 18's mounted early next week.

[e30love]

yea they are. i found out the hard way

[Massive Lee]

How much are those again? Fit under 15'' rims?

$1050usd + pads
Free spacers included.
No extra charge for the new vented/slotted rotor.

New generation one-piece caliper brackets. They are now machined with integral spacers.

Fit under certain 15" wheels. Like Team Dynamic Pro Race 2.0
Don't forget that the rotors and calipers are really bigger than they look on pictures.


Rear brakes



Front brakes with 3mm spacers




A smaller 280mm kit is now available for people who are wheel-challenged... $660-$720usd

[LowR3V'in]

Very shmexy!
How much are those again? Fit under 15'' rims?

[Massive Lee]

Noice!!!

We now make out own 0.81" rotors with directional vanes (for improved cooling) and optional slotting. The rotors are 33% cheaper than Wilwood's and can be ordered sloted, which Wilwood doesn't have.

With the directional vanes, I am more comfortable with that Street kit to be used hard on the track.

Lee

[E30Idea]

Looks awesome!

[Beej '86 325es]

I love the look of it, now I can't wait to drive it!

Cut off the mounting hole for the old backer plates...


Mounted the adapter...


And the beauty...