Drop Hats.....

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • getouth
    replied
    I installed the same set up as you lowtech 60/50 with E90 drop hats. No modifications, its only been 50 or so miles but so far so good.

    Leave a comment:


  • aegul44
    replied
    thanks for the responds guys. Will be getting them soon.

    Leave a comment:


  • Vincent Brick
    replied
    Only had mine in for like 2 weeks, put them in just like stock E30 pieces with the thick E30 washer between the hat and (brand new Sachs) upper mount. No binding issues at all. I didn't remove anything off the bottom of the hat with a BFH, maybe I should have though because i am still trying to get the front lower.

    Figured I would add my experience. Somehow I missed this stickied thread when doing my own research on these hats before buying them.

    Leave a comment:


  • george graves
    replied
    I put them in 100% stock - didn't add or take anything away.

    Leave a comment:


  • aegul44
    replied
    Originally posted by george graves
    I've been running e90 drop hats since 2011-ish with no issues.
    Did you use washer ? I bought lowtec springs 60/50, while at there I am planning to throw in drop hats. Should I use the existing washer or get another one for e90 drop hat.

    Leave a comment:


  • Swendog
    replied
    I recently installed drop hats with H&R sports and Billy sports. No issues with binding whatsoever.

    Leave a comment:


  • george graves
    replied
    I've been running e90 drop hats since 2011-ish with no issues.

    Leave a comment:


  • aegul44
    replied
    any updates on long term user. After reading all pages, it seems like we have to put washer to avoid any binding.

    Leave a comment:


  • E30J
    replied
    Drop Hats.....

    So I took my stock hats out all together.. Anyone ever tried this? How bad will it f** up the rubber bushing? I live on a small island so I don't see any highways or long road trips.

    Cheers

    Last edited by E30J; 11-29-2014, 01:29 AM.

    Leave a comment:


  • KIRIEIW
    replied
    So no pic's of the grinding issues against the strut tower? I'll be ordering the e90 hats and the washer that's suppose to be between the drop hat and bearing. Hopefully there wont be fitment issues. I'd also like to add that I too read all 18 pages.

    Also, is this the piece you hit off with your BFH

    Click image for larger version

Name:	0000487_e90-drop-hats-get-your-e30-even-lower.jpeg
Views:	1
Size:	36.1 KB
ID:	7171992
    Last edited by KIRIEIW; 11-02-2014, 12:34 AM.

    Leave a comment:


  • lambdamu
    replied
    I'm running a set of e90 drop hats on mine. No seating issues with the h&r race springs. Has anyone run the e90 drop hat with the GC touring camber plates? I'm getting incomplete info after exhaustive searching.

    Leave a comment:


  • SkiFree
    replied
    BMW List pricing is always fluctuating, at the moment they are bmw-list $13.77 each.

    Try telling them you know what the current list price (quoting price above). If that doesn't work then call a different local dealer or just order them from just about any respected online retailer.

    Leave a comment:


  • Dukereturns
    replied
    My dealer just quoted me $25 EACH for these. Is that right?

    Leave a comment:


  • delamaize
    replied
    Bought some drop hats today, just gotta wait till I can afford some other suspension components before I get them installed.

    H&R E36 M3 springs and E90 hats on the front, in my sig picture.
    Last edited by delamaize; 05-24-2014, 07:16 PM.

    Leave a comment:


  • george graves
    replied
    Originally posted by delamaize

    2: 14 pages of insults, bitching, arguing, and general butthurtness.
    If they didn't work, there would be 100 pages of butthurtness.

    Leave a comment:

Working...