length of rear coilover spring?

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • grippymonkey
    replied
    So I don't think anyone officially said. What spring ID are you guys running?

    Leave a comment:


  • ak-
    replied
    Originally posted by chop_suey
    On an early, high rear arch car, what length should the coilover springs be in the rear so theres minimal wheel gap? Are adjusters needed?

    I was thinkin maybe a 5" or 6" 700ish lb spring.
    Originally posted by DJ W
    where would one find a 5in 700lb spring im getting frusterated with searching i only find 8 and up or 150lb 5in
    thanks
    Ah poop. Wish I wasn't late to this thread to let you guys know that if your going to run that high of a rate in the rear, a 5'' spring won't be low enough for you, especially for an early model.

    Leave a comment:


  • SA E30
    replied
    Technically it's not a rear coilover that is being spoken about.

    It's an inboard spring with an adjuster.

    I run, 600lbs 60mm id spring on a true coilover...

    Leave a comment:


  • DJ W
    replied
    my rear spring is a coil over spring 5in with a 2in id its big though i think a 1.5 or 1.75 id would b better

    Leave a comment:


  • AbsorbantNut
    replied
    Originally posted by BMC227
    Is that 5 inch diameter or length?
    Length

    5 inch length. I think diameter is called spring ID which is 2.25 for e30s? Double check that tho

    Leave a comment:


  • BMC227
    replied
    Is that 5 inch diameter or length?

    Leave a comment:


  • AbsorbantNut
    replied
    Originally posted by BMC227
    Sorry to hi-jack but can you run a rear coilover spring without the adjuster?

    cheers.
    Originally posted by E30SPDFRK
    This is JPlue's car, 5" 700lb rear spring with no adjuster.

    Leave a comment:


  • BMC227
    replied
    Sorry to hi-jack but can you run a rear coilover spring without the adjuster?

    cheers.

    Leave a comment:


  • DJ W
    replied
    5in 700lbs rear springs there not low enough for me.
    Attached Files

    Leave a comment:


  • DJ W
    replied
    i will they should be here this week they wer on back order?

    Leave a comment:


  • chop_suey
    replied
    lemme know how that 2" ID spring fits, and pics too if u can

    Leave a comment:


  • DJ W
    replied
    ordered 2id 5in 700lb H&R along with a short shifter

    Leave a comment:


  • DJ W
    replied
    Originally posted by chop_suey
    --thanks for the pic e30spdfrk, that helps alot.
    ^^^arite cool deal, ill look there aswell.

    BTW what, if anything, holds that spring in place when the car is raised?
    nothing does the last ones i had i would half to check them when i set it down they just sit around the little perches

    Leave a comment:


  • chop_suey
    replied
    --thanks for the pic e30spdfrk, that helps alot.
    ^^^arite cool deal, ill look there aswell.

    BTW what, if anything, holds that spring in place when the car is raised?

    Leave a comment:


  • bimmerteck
    replied
    Originally posted by DJ W
    where would one find a 5in 700lb spring im getting frusterated with searching i only find 8 and up or 150lb 5in
    thanks
    I would start with the eibach ERS catalog.

    Eibach engineers, manufactures, and sells the highest quality performance aftermarket suspension products in the world.

    Leave a comment:

Working...