Super Slammed

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • grippymonkey
    replied
    ^ haha which eibach's.. pro-kit? you will no be slammed with just some eibach springs. Your mechanic sounds like a tard.

    Leave a comment:


  • stubble88
    replied
    i have eibach springs that i just bought and my mechanic told me it will be slammed so Im not using them
    let me know if you want them

    Leave a comment:


  • DJ W
    replied
    yup nothing but spring in the rear 700 spring rate

    Leave a comment:


  • 87e30
    replied
    Originally posted by DJ W
    i have 5in in the rear and its to high for me
    Did you take out your adjuster.

    A GC "off the shelf" kit will work for you because they will use shorter koni's and cut the strut housing however much you want.

    Even if you cut it about 1 inch and run no adjuster in the back with stock length 5.5 or whatever springs you'll be low. Nice and low.

    This is lifted in the back and non cut strut housing. (AKA one inch higher in the front than you'd be, plus if you get camber plates those can lower your ~.5 inch)

    Leave a comment:


  • DJ W
    replied
    i have 5in in the rear and its to high for me

    Leave a comment:


  • CHIF8008
    replied
    4in rear springs and coil-overs up front. that will get you to sit on the floor

    Leave a comment:


  • IRON-E
    replied
    Ride on your rotors, no rims or tires\super slammed.

    Leave a comment:


  • DJ W
    replied
    Originally posted by mr.vang
    trust me you won't want to slam an e30. the oil pan will make you cry.
    carry a spare like i had to till i lifted it now i want back down

    Leave a comment:


  • FunfGan
    replied
    This could totally be a new fad... Spring deletes and sticker-bombed wheels will be all the rage this summer.

    Leave a comment:


  • e30 gangsta
    replied
    Spring delete mod summer 2011 the new hype.

    Leave a comment:


  • FunfGan
    replied
    ^ Do it. I will cry if If I have to look at another bagged e30.

    Leave a comment:


  • Danny
    replied
    Originally posted by getouth
    It's not a honda!! This is a classic piece of German engineering it was not designed for that!
    GTFO. Spring delete or go home to mommy.

    Leave a comment:


  • getouth
    replied
    It's not a honda!! This is a classic piece of German engineering it was not designed for that!

    Leave a comment:


  • Danny
    replied
    Originally posted by MR 325
    Pretty much coilovers with shortened housings or bags. No off the shelf kit will be low enough for you I would assume.
    Matt, back me up here.

    Leave a comment:


  • MR 325
    replied
    Pretty much coilovers with shortened housings or bags. No off the shelf kit will be low enough for you I would assume.

    Leave a comment:

Working...