Here's a GIF I made up to show the difference of ride height vs stock I got with H&R Race Fronts + FK Rear Springs. All pads up front and no pads in back. I did the fronts a while ago and decided since the rears were so easy to get to/do, I would try it without the pads to see what would happen. It turns out the rear is sitting right where I would want the front to sit so I'm thinking of not running pads in the front either.
Do you guys know of any good THIN material to use in place of the pads to stop the rears/fronts from moving slightly and being noisy?
Since I'm lower now, I'm seeing that my exhaust system is really standing out. Is this a problem for everyone or is my shit just jacked up from the PO?
Sorry I don't have better pics, I think I'll take more tomorrow with a tape measure to show how far the exhaust is from the ground.
In the second pic below you can see an arrow pointing to a connection flange that is really sticking out.
Do you guys know of any good THIN material to use in place of the pads to stop the rears/fronts from moving slightly and being noisy?
Since I'm lower now, I'm seeing that my exhaust system is really standing out. Is this a problem for everyone or is my shit just jacked up from the PO?
Sorry I don't have better pics, I think I'll take more tomorrow with a tape measure to show how far the exhaust is from the ground.
In the second pic below you can see an arrow pointing to a connection flange that is really sticking out.
