Hey guys - I switched out the J Stock springs for H&R Sports but kept the ST sway bars - I seem to have an odd clunk coming from the right rear going over speed bumps. I can't seem to find any issue or interference anywhere, could it be that the adjustable end links need to be shortened or lengthened? Looking at the body, it looks like the sway bar could possibly be hitting the body on compression. Shortening them I think would do the trick. I used the standard 4 inches as the measurement previously
Their advice:
you may have increased height and thereby increased pre load. You will need to take a measurement with the car fully weighted and the swar bar disconnected. then measure from the bar to the mounting point (eye to eye) and compare that to the length of your end link
Their advice:
you may have increased height and thereby increased pre load. You will need to take a measurement with the car fully weighted and the swar bar disconnected. then measure from the bar to the mounting point (eye to eye) and compare that to the length of your end link
