325iX Wheel thoughts

[StinkE30]

Just paint your weaves? Can't beat 'em for like $50 and elbow grease.

[litu]

You have the same problem as me

Here is my question

Hello.
I've been thinking about this summer tires for your car.
Wheels are 7x17-inch, ET 35
What kind of tire sizes should put in, generally fit even the wheels roll.
Do I need a spacer. How about if you put 5mm spacer behind the front is 5mm wider track width
Thank you for your advice

I got such a response

You should be able to use those without spacers, but they will be very sunken into the arches and look poor. I'd suggest 20mm spacers all around with 205/55 or 205/50 tires for the best look and performance.

[asetliff]

I was hoping there would be an 325iX Wheel Thread, but we may start one at some point.


I am looking at a few sets of wheels for the iX. I'm thinking upping to 17x7 with an offset somewhere around +35 to +42... I'd like either 5 spoke or a mesh type of wheel. I don't want to break the bank, I don't abuse the car or beat on it too hard.

Wheels I'm thinking about:
XXR 530 17x7 +35


XXR 962 17x7 +40


Tenzo R Type M 17x7 +42


As far as tires I'd like something around a 205-215 with a sidewall of 40-45ish... Not going low with the iX.

Anyway, here is a photo for reference, not mine, but very similar.



Thanks R3V!