E30 325e wheels

[awesomeaxel]

I am terrible at names, are you the one I met at ASU today?

Nope that wasn't me. I did have my car parked there about a month ago though

[Mr. Tasty]

I am terrible at names, are you the one I met at ASU today?

[awesomeaxel]

Is this ben?

Who? Me?

[Mr. Tasty]

Is this ben?

[jalopi]

For serious, use this site bro:

http://www.rimsntires.com/specspro.jsp

I've got 16x8's, 0 offset and 205/45's on them. Fronts are flush, rears are not quite flush, moreso tucked. Per that website, with no spacer, those 16x8 with 22 offset would be roughly 1" sunk.

[awesomeaxel]

16X8 et22. Would that fit?

[awesomeaxel]

I will look around and find some other wheels I like. Ill post them here on this thread to get the opinions of you E30 veterans :D

[awesomeaxel]

The issue is moreso the inside diameter of the wheel and the design of the wheel. Clearance issues with the inside face of the wheel can be fixed with spacers, but inside diameter clearance issues can only be fixed with grinding.

I might just try and get some other wheels. These unfortunately seem to be a lot more work than I thought it would be.

[jalopi]

Even with the 8 inch wide wheel and ET12 offset? If so what about spacers? Im definitley not grinding my calipers.

The issue is moreso the inside diameter of the wheel and the design of the wheel. Clearance issues with the inside face of the wheel can be fixed with spacers, but inside diameter clearance issues can only be fixed with grinding.

[ikonwun]

chandler huh..

I would like to see more e30s in chandler

[awesomeaxel]

Maybe look for a set of VW Steelies that have been widened they cam in 15x6.5 and 15x7 in 4x100 fitment. Poke around on VWVortex.

Hmm, ill look around. Thanks! :o

[mickyy98]

HI SORRY
SORRY WE HAVE NO KNOWLEDGE ABOUT UR THREAD IF U HAVE SOME THREAD ABOUT CLASSIFIED CONTACT THE LINK BELOW US
[URL=http;//www.alladsclassified]

[M-technik-3]

Maybe look for a set of VW Steelies that have been widened they cam in 15x6.5 and 15x7 in 4x100 fitment. Poke around on VWVortex.

[awesomeaxel]

There is a very good chance the wheel is going to hit your brake calipers. Some people have ground down their calipers, but that is sketchy IMO.

Even with the 8 inch wide wheel and ET12 offset? If so what about spacers? Im definitley not grinding my calipers.

[AndrewBird]

There is a very good chance the wheel is going to hit your brake calipers. Some people have ground down their calipers, but that is sketchy IMO.