Replaced wheel bearing... same noise after replacement

[kmoran12]

might be cv joint mine was making a weird grinding metal kind of noise

[maxmonster]

Sounds like a bad diff bearing to me. I just had the same problem. Replaced rear wheel bearings and CV axles didn't help. it was the diff.

Sorry should clarify... changed fronts.

[Bejoe16]

Sounds like a bad diff bearing to me. I just had the same problem. Replaced rear wheel bearings and CV axles didn't help. it was the diff.

[maxmonster]

Well new tires... no change really... less noise tho... I replaced with FAG brand wheel bearings

[JGood]

I installed an off-brand rear wheel bearing (was in a pinch), and it made some noise for probably 1k miles. I ordered a new OEM bearing to replace it with, but the noise eventually went away prior to replacement. I replaced it anyway haha. The noise was a sort of whining sound, not a typical groaning, and only when turning and putting load on it at higher speeds.

[maxmonster]

yer tires may be the cause. how did the spindle look, was is marred up?

Looks smooth n sexy.

I gotta get new tires anyways today so I'll report back later...

[golde30]

yer tires may be the cause. how did the spindle look, was is marred up?

[maxmonster]

Firstly, if this is in wrong section please move accordingly...

I changed my wheel bearings yesterday... both fronts were shot (drivers side had no noise but was loose, passenger side had that iconic wheel bearing giving out noise in relation to speed). As I test drove it around the block a couple of times noises were gone, parked it and then went out later in the day. As I was driving, passenger side noise came back... I will say though I only get noise around 50-55 mph, otherwise no noise even on hard turns...