Announcement

Collapse
No announcement yet.

ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    i wanna just know the most backspacing for front and back with a 17inch rim?? i got a late model, on coilovers(joms) but switching to better ones.

    Comment


      Originally posted by Mystikal View Post
      215/40 is the limit all around with either setup. Maybe 235/40 rear only if it's an early car.
      Is that because if fender clearance? Or offset?


      E30 M30 B35 Swap Mounts!
      http://store.garagistic.com/ocart/e3...=5475809a87e04

      Comment


        Originally posted by mohamed... View Post
        Is that because if fender clearance? Or offset?
        Both, by nature. I guess to answer another way yes, of course E30s can fit larger that 215/40 under their fenders.

        Comment


          Originally posted by Mystikal View Post
          Both, by nature. I guess to answer another way yes, of course E30s can fit larger that 215/40 under their fenders.
          How can I make that happen?


          E30 M30 B35 Swap Mounts!
          http://store.garagistic.com/ocart/e3...=5475809a87e04

          Comment


            17x8.5 ET13 all round


            Will be on H&R race/Billy Sports / E30 M3 gear.

            Thinking 205/40/17 and a fender roll f/r should see me right?

            SILBER COMBAT UNIT DELTA (M-Technic Marshal)
            RTFM:http://www.r3vlimited.com/board/showthread.php?t=56950

            Comment


              215/40 will fit with a good fender roll, have to run a 5mm spacer in front for that wheel. I have 2 sets of those same wheels.

              Going onto early or late rear fender arch? With that same suspension setup I am getting some rubbing on the rear with that tire size and late model rear archs. Dont want to go down in tire size, so looking to go with coilovers and stiffer springs to prevent rubbing on throttle and through hard turns.
              IG: @Baye30

              FRONT VALENCE IS ZENDER!!! STOP FILLING MY PM BOX PPL!!!

              Comment


                Late model arches. I'm running the 8.5 ET17 rear on a 215/40 right now (see sig) and it rubs slightly.

                That the same suspension setup in your sig?

                SILBER COMBAT UNIT DELTA (M-Technic Marshal)
                RTFM:http://www.r3vlimited.com/board/showthread.php?t=56950

                Comment


                  Originally posted by mohamed... View Post
                  How can I make that happen?
                  Higher net offset wheels. +25 is ideal for 235/40s.

                  Comment


                    Originally posted by Ray Smoodiver View Post
                    17x8.5 ET13 all round


                    Will be on H&R race/Billy Sports / E30 M3 gear.

                    Thinking 205/40/17 and a fender roll f/r should see me right?
                    Yup, 205/40 for a late model on E30 M3 hubs with those wheels.

                    Comment


                      Mystikal, I found a unique set of 15s, here are the dimensions rqst help again;

                      15X9.5
                      4x100
                      there is an option for offset, which is best 15 or 25? I'm thinking 15?
                      And which tire would be best?
                      Spacers needed?
                      My old Style 5 Thread / My Swap
                      1991 318IS :bow: 2.5L S14 Swap/BC Coilover suspension/Some new (old) wheels/
                      IS Skirt-Lip/RG Splitter/M-Technic I Spoiler/Dogleg/3.46 Diff/Euro H4 headlights etc.
                      1998 528I (Sold) // 2003 540I ///M Sport

                      Comment


                        Originally posted by keefy6 View Post
                        Mystikal, I found a unique set of 15s, here are the dimensions rqst help again;

                        15X9.5
                        4x100
                        there is an option for offset, which is best 15 or 25? I'm thinking 15?
                        And which tire would be best?
                        Spacers needed?
                        15, and you'll likely need 10-12mm spacers for the fronts to clear the struts. 205/50 tires.

                        Comment


                          Originally posted by Ray Smoodiver View Post
                          Late model arches. I'm running the 8.5 ET17 rear on a 215/40 right now (see sig) and it rubs slightly.

                          That the same suspension setup in your sig?
                          Yes same setup. But in the Sig I have 235/40/17 on msystems. I had to tweak the h&r race setup to make it sit that way, PM me for details.
                          IG: @Baye30

                          FRONT VALENCE IS ZENDER!!! STOP FILLING MY PM BOX PPL!!!

                          Comment


                            Originally posted by Mystikal View Post
                            Higher net offset wheels. +25 is ideal for 235/40s.
                            We'll I already have 2 sets of wheels with offsets lower than that. Can I make it work with the fender roller?


                            E30 M30 B35 Swap Mounts!
                            http://store.garagistic.com/ocart/e3...=5475809a87e04

                            Comment


                              Originally posted by Mystikal View Post
                              15, and you'll likely need 10-12mm spacers for the fronts to clear the struts. 205/50 tires.
                              great, thanks again this size tire isn't too tall or too thin right? looking to fill the wheel well.
                              My old Style 5 Thread / My Swap
                              1991 318IS :bow: 2.5L S14 Swap/BC Coilover suspension/Some new (old) wheels/
                              IS Skirt-Lip/RG Splitter/M-Technic I Spoiler/Dogleg/3.46 Diff/Euro H4 headlights etc.
                              1998 528I (Sold) // 2003 540I ///M Sport

                              Comment


                                Originally posted by mohamed... View Post
                                We'll I already have 2 sets of wheels with offsets lower than that. Can I make it work with the fender roller?
                                No

                                Comment

                                Working...
                                X