Hubcentric Ring Problem

[Mystikal]

Well, he must have told you the wrong size. Head to a local wheel/tire shop that has a selection of rings and find the right ones. Or, maybe someone that has the right ones will post here...

Jay

[E30_fiend]

i thought you said they did'nt shake?

No no they do. Remember, when you were in my car I let you feel the steering wheel and I said, "this is the only shake I have in the steering wheel". I mean its nothing major its just kind of a little annoyance.

E30Fiend

[E30FreaK89]

i thought you said they did'nt shake?

[E30_fiend]

have you check your control arm bushing?

Actually yes I did but that wouldn't explain my current problem because before I put the new wheels on, I never had this problem.

The rings don't even touch the wheels on the front or rear.

Thanks though Joey.

E30Fiend

[pe2one]

have you check your control arm bushing?

[E30_fiend]

About a month and a half ago I bought some sportmax 501's and before they arrived I also ordered some hubcentric rings. I talked to Jesse30 on here and he told me the correct size rings to get because he had had them on his previous car before he sold it. So I went ahead and ordered the rings. When the wheels arrived I also received the rings the same day so I installed everything in one shot.

Now here's my problem, when I put the rings inside the wheels, they fit just fine but what I noticed was that the rings aren't tall enough to reach the centerbore of the wheel itself. There is a slight shake from 55 to 65 but thats it. I would like for everything to be smooth like it should be.

Does anyone know if I can do anything to fix this problem?


thanks,

E30Fiend