Anyone familiar with pulling obd2 codes?

[Stephen]

Nothing wrong with obd2. Lots of pro's for it, hardly - if any - cons these days. I wouldn't consider my build half-ass by any means. Don't think anybody else on here would either.


Spend the $150 on the peake tool. I use it all the time, it's quick, easy, accurate, and proven.

Its not you being half ass. We just make fun of clayton since hes been working on his car for a while now :p

[MIKe30]

Obdwonnnnnnn

thats what ive been telling him from the beginning....now look where his halfassness has taken him hahaha

hes the most stubborn bastard on this planet.

Nothing wrong with obd2. Lots of pro's for it, hardly - if any - cons these days. I wouldn't consider my build half-ass by any means. Don't think anybody else on here would either.


Spend the $150 on the peake tool. I use it all the time, it's quick, easy, accurate, and proven.

[Stephen]

thats what ive been telling him from the beginning....now look where his halfassness has taken him hahaha

hes the most stubborn bastard on this planet.

inorite :p

[namsayin]

Obdwonnnnnnn

thats what ive been telling him from the beginning....now look where his halfassness has taken him hahaha

hes the most stubborn bastard on this planet.

[Stephen]

Obdwonnnnnnn

[namsayin]

^ clayton's typical half-ass-ness-self -_______-

[87e30]

What's wrong with a regular peake reader? That's what I use on my s52. Unfortunately it's a little too honest with me, ha.

I don't have a lot of money... so I'd rather just acquire the software... then get some inexpensive hardware. Just want to make sure that the hardware will speak with carsoft. I'm leaning towards teh "carsoft" approved one even if it's 2 times the cost less hassle may be worth it.

[MIKe30]

What's wrong with a regular peake reader? That's what I use on my s52. Unfortunately it's a little too honest with me, ha.

[87e30]

Maybe I should just buy this:

http://www.dhgate.com/bmw-carsoft-6-...3de19ae.html#0

Since it says it should work with carsoft. Then just plug it into an old laptop that still has that style port.

Do you think this would be the better choice? I'm trying to go cheap here, figuring I can *download* carsoft somewhere makes just buyying the hardware the cost I'm trying to figure out.

[robmespeedy]

If I were to get this:
(20 pin to regular 16 pin universal obd2 connector)
http://cgi.ebay.com/ebaymotors/BMW-2...motiveQ5fTools
.

i bought the same one a while back. thinking it would work with my scanner. it didnt.
i have the actron cp9185.
if you want to give it a shot. you can have my adapter $12 shipped.

[e30s52]

Yep if you have a generic obd2 reader you can get the codes but you wont be able to run any tests.

[mrsleeve]

I would assume you are gonna be using the stock DME right? If you have the OBD II diagnostic port for it, any generic OBD II reader will work fine

[87e30]

If I were to get this:
(20 pin to regular 16 pin universal obd2 connector)
http://cgi.ebay.com/ebaymotors/BMW-2...motiveQ5fTools

And this:
(universal obd2 code puller to a usb cable)
http://cgi.ebay.com/ebaymotors/SCANN...motiveQ5fTools

And connect this to a laptop running windows with carsoft 6.5 software.

Would I be able to diagnose an obd2 m52?

I have NO experience doing this but I'm trying to get a, you guessed it, m52 running.