racing dynamic rear apron interest

[johnwoo]

in for second apron behind mike. how would i pay to the canadian distributor? cc? and who would i contact for a ship quote.

guys this is a great deal its cheaper than the original list of 468 for a nla part. why pay the 420 price for a used when you can get a new one for that price. and fyi i was quoted 425+ship for a used rd apron from a member on here. the used apron was in ok shape with holes drilled in and some ripped off. anyways great deal and hopefully this goes through

list in for the apron:
1. Mike Tomascik
2. johnwoo

[MikeTomascik]

So here is the moment of truth!

I spoke to my power dealer today, and everything is a go as long as we have a minimum of 10 people on-board and who are 100% positive that they are going to place an order. The rear aprons will go for $420.00 a piece. That will be the price for both American and Canadian residents seeing as our dollars are relatively at par with each other. As far as shipping goes, for those of you in the US the aprons will be distributed by Racing Dynamics, so you will not have to concern yourselves with any hefty international shipping fees or duty. For the Canadians, the aprons will be distributed by Oakville Motorwerks who are located just outside Toronto in Ontario. Oakville Motorwerks is a Power Dealer and have assured me that cross-country shipping will not be ridiculous, and will range anywhere from $20-50 per apron. They do this sort of distribution all the time and there's is no need for cross-continent shipping concerns.

As far as time goes, we should expect the aprons to be distributed by mid to end of June. This is expected seeing as Racing Dynamics must obtain the mould of the rear apron from Italy, and shipping time may vary depending on peoples' locations from California and Toronto. Kevin and I will record and tally the first 8 of you who show 100% certainty of purchasing, and then I will distribute particular details to the buyers. If we happen to end up with a greater number of positive buyers than 10, I will consult my dealer and ask if it's possible to extend his purchase order. Otherwise, it may be first come first serve (or first post first serve I should say). All costs will be paid up front to Oakville Motorwerks. After confirming 10 certain buyers, my dealer will post an ad for the apron under E30 on his website and purchases can be made securely through the website.

Thanks guys,
Mike Tomascik

[johnwoo]

updated list
interested:
miketomascik
johnwoo
m5wanab
zm blue devil - pending price
txtorguemade - pending price
jparkr - pending price
chadthestampede-pending price
e30_325is_mtl
TOM1911
slangbox
psyber_0ptix-pending price
vacman
joonsup-pending price
streitchoigaoinaecond

also interested parties from bfc:
clutchkick
popobo69

[joonsup]

interested pending price

[Streichholzschächtelchen]

Intersted

[johnwoo]

updated list
interested:
miketomascik
johnwoo
m5wanab
zm blue devil - pending price
txtorguemade - pending price
jparkr - pending price
chadthestampede-pending price
e30_325is_mtl
TOM1911
slangbox
psyber_0ptix-pending price
vacman

also interested parties from bfc:
clutchkick
popobo69

[VacMan]

I'd be interested, especially if you're working with Federico at RDSport in Orange County.

[MikeTomascik]

Alright guys so here's the scoop. I talked to my distributor today and he called Racing Dynamics to find out more details. Apparently they don't have the mould for the rear apron right now, but are going to obtain it from Europe within the next week. The aprons will be made out of a more economical and pliable resin, carbon kevlar, instead of the old style polyurethane. I will have the pricing within the next 48 hours so sit tight.

Thanks,
Mike Tomascik

[johnwoo]

They were selling the last of their stock last year for like $100. Wish I had jumped at that chance

ha i wish it was still that price.

[psyber_0ptix]

that'd go nicely with my racing dynamics rear wing... may be interested depending on cost

[E30SPDFRK]

They were selling the last of their stock last year for like $100. Wish I had jumped at that chance

[johnwoo]

If it will fit with plastic bumpered cars, I'd be interested.

yes i have a plastic also and that is why im going with this apron

[johnwoo]

interested:
miketomascik
johnwoo
m5wanab
zm blue devil - pending price
txtorguemade - pending price
jparkr - pending price
chadthestampede-pending price
e30_325is_mtl
TOM1911
slangbox

also interested parties from bfc:
clutchkick
popobo69

[johnwoo]

If this is a direct fit for a car with US diving board bumpers, I would be interested depending on price and if they are willing to ship to Canada...

mike the guy contacting rd has a diving board and it is a direct fit; mike is also from canada from what i understand he is contacting rd and a dealer of rd. he is hoping by going the dealer route shipping to canada would be more affordable.

[Slangbox]

Interested.