"slap stick" transmission
Collapse
X
-
Slapstick? Maybe a shifter paddle if I was paralyzed, no offense paralyzed people who own e30's, ehh. -
Anyone think of designing a simple no lag turbo to go along with this?Leave a comment:
-
gonna do my kickdown this weekend, but also want to get the shift kit.
is it a real shift kit, or does it just "refresh" the trans?Leave a comment:
-
i want a sequential with non helical gears. Race car status. That and antilag for flames!Leave a comment:
-
Yes you can tighten up the accelerator bowden cable, or kickdown cable, that will help a little, but not much. this pretty much controls how hard the tranny shifts. The part that does most of the control on the shift points, is the govenor. If you take the tailhousing off the tranny you will see the govenor on the shaft. You can either take it apart and lighten the weights, which is a pretty big hit and miss thing, or you can buy one new or used for a 318 which has higher shift points. But remember, if you have an eta, your torque converter is about a 900 rpm stall, if you have an i it is about 1400 rpm, and if you have a 318 it is about 1600 rpm. Everybody here seems to hate these little 4hp22's, but they are pretty good for what they are. And they make it easier to drink coffee and talk on the phone and do my makeup on the way to work... Just kidding... I wouldn't dare talk on the phone...i just wanted some info on it, thanks though.
any ideas on changeing the shift points in the transmission?
i heard i could tighten the shift cable so it "thinks" i am using more throttle than i am so it will revi higher longer(not talking about raising rev limit, i mean holding gears longer)
Good luckLeave a comment:
-
what dis a automatic yo?
I was only drawn to this thread by the catchy title, slapping sticks.Leave a comment:
-
-
mine sure had a cable for the downshift "linkage" running up to the throttle body (which is what he is talking about). A slapstick has nothing at all to do with the trans.-- I have a slapstick shifter in my 55 Bel-Air. It annoys the crap out of me what you have to do to get the car in reverse, and you can also just put it in "D" and not need to ratchet each gear.
BTW, mine is a B&M and it is universal, i am sure you can make it work on an e30 if you get one for a 4 speed automatic.Leave a comment:
-
The e30 does not utilize a cable, it has a steel rod. Very hard rod is.Leave a comment:
-
-
Assuming you have an automatic car, can't you buy shift kits for them that do this? I wouldn't know, never looked up parts for an auto.Leave a comment:
-
i just wanted some info on it, thanks though.
any ideas on changeing the shift points in the transmission?
i heard i could tighten the shift cable so it "thinks" i am using more throttle than i am so it will revi higher longer(not talking about raising rev limit, i mean holding gears longer)Leave a comment:
-

Leave a comment: