makng 500 hp for 2k

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Raxe
    replied
    Originally posted by bmw325csi
    Easier thing is just swap in an LS1 or 2 and call it a day, They can be had for 800-1000 these days
    Originally posted by FunfGan
    I would say 2zj swap. You can buy a manual sc300 for around 1000 bucks then part out the rest of the car and make some money back. The 2zj swap kit(all the mounts) only costs about $200. Then you've just got wiring and the driveshaft to modify. Oh, and with the money left over throw a Big mutherfucking turbo on there. All for 2-3 grand.
    ?!?!

    OP just get a nice used Viper SRT-10 for around $600-$800 and slap some twin turbos on it (maybe another $300 if you get all new parts.) Easy 1000hp.

    Leave a comment:


  • Mercury[BKM]
    replied
    Gotta tune the NOS timing, you'll be running 9s

    Leave a comment:


  • Good & Tight
    replied
    Originally posted by E30_(1st Musk)_
    i agree with who ever mentions megasquirt..because if you want 500 hp your gonna need the max tuning capability and you cant get that with a chip
    Stock DME is capable of over 500 whp, a custom tune will cost over 1k. Go megasquirt if you want to save $$.

    Leave a comment:


  • E30_(1st Musk)_
    replied
    i agree with who ever mentions megasquirt..because if you want 500 hp your gonna need the max tuning capability and you cant get that with a chip

    Leave a comment:


  • samiam3356
    replied
    Originally posted by Good & Tight
    Turbo M30, they are dirt cheap. Just slap an MLS, ARP's, big turbo and your good for 500whp and will rape almost anything on the streets. I've eaten modded Z06's and sprayed Vipers in mine.
    Listen to this man and look at his dyno numbers. Guys on bf.c have taken m5x's pretty up there in the hp range without failure. I would look there and get Gunni's and Ixer's advice on tech.

    Leave a comment:


  • Good & Tight
    replied
    Originally posted by bloodshot-e30
    okay lemme re state that it has to be on a 24v DOHC motor
    such as: M50 M52 S50 S52.... lol
    Stock M52 with S52 cams ARP's, MLS 500hp all day long on pump gas then.

    Leave a comment:


  • bloodshot-e30
    replied
    ^^^ LOL true ;) i could get 1 maybe 2 dyno pulls with it :D

    Leave a comment:


  • tyleRcoey
    replied
    bigass shot of nitrous... might make 500hp for a second before the BOOM!

    Leave a comment:


  • bloodshot-e30
    replied
    Originally posted by rThor432
    Don't turn your daily driver into a dyno queen. You'll spend $2k trying to put down the power. Jesse's 300hp M10 outran Aaron's 430hp M20 at the 1/4 because the M20 couldn't put the power down. Show them someone elses dyno sheet if you want to prove that a BMW can put down 500+, there's no sense in wasting your time.

    My opinion Josh.
    the motor i build is also going in my white shell and im getting another CLEAN shell and making this one a drift car (just another reason im doing a build) :)

    Leave a comment:


  • bloodshot-e30
    replied
    okay lemme re state that it has to be on a 24v DOHC motor
    such as: M50 M52 S50 S52.... lol

    Leave a comment:


  • rThor432
    replied
    Don't turn your daily driver into a dyno queen. You'll spend $2k trying to put down the power. Jesse's 300hp M10 outran Aaron's 430hp M20 at the 1/4 because the M20 couldn't put the power down. Show them someone elses dyno sheet if you want to prove that a BMW can put down 500+, there's no sense in wasting your time.

    My opinion Josh.

    Leave a comment:


  • z31maniac
    replied
    Originally posted by bmw325csi
    Easier thing is just swap in an LS1 or 2 and call it a day, They can be had for 800-1000 these days

    Pray tell, where these $800 LS1s can be found?


    You can do one of the 4.8/5.3 GM engines CHEAP, and all they need is a cam/tune and are good for serious numbers.

    Leave a comment:


  • bloodshot-e30
    replied
    lol im not dick measuring just trying to prove i can make 500 for 2 not caring if its reliable or not, then i said i could make it reliable for 3-7k.... 2jz swap? no ill pass im done doing swaps for a while haha.

    i still havnt really found any step by step builds but we'll see lol

    Leave a comment:


  • blunttech
    replied
    Originally posted by Good & Tight
    Turbo M30, they are dirt cheap. Just slap an MLS, ARP's, big turbo and your good for 500whp and will rape almost anything on the streets. I've eaten modded Z06's and sprayed Vipers in mine.
    this right here. Ive never known anyone to make more power for less money than Otis

    Leave a comment:


  • FunfGan
    replied
    I would say 2zj swap. You can buy a manual sc300 for around 1000 bucks then part out the rest of the car and make some money back. The 2zj swap kit(all the mounts) only costs about $200. Then you've just got wiring and the driveshaft to modify. Oh, and with the money left over throw a Big mutherfucking turbo on there. All for 2-3 grand.

    Leave a comment:

Working...