1000 rwhp engine build video

[morerevsm3]

WOW way cool, ive built SR's and RB's back at the shop and i was really impressed with the really close attention to detail. This guy knows his shit!
Its too bad most motor shops dont use torque blocks and actually do it all right like this guy. So true what he was saying about taper and egg shape cylinder walls with expansion and retraction with machining temps, and also about the hatching shards that the rings usually pick off during break in.

I really like the idea of proper machining and eliminating any metallics in the oil.

i bet to have your motor done there it cost big bucks.

Thanks for posting this vid

when I built my (Aussie) spec E30 motor, I had a torque plate made, properly round bores are worth ~ 3rwhp...

he should not have rings on his fingers when handling the crank and installing pistons, rings will bruise the journals

[slaterd]

yessir

[drutt23]

nice stuff here...

[slaterd]

you've got that backwards... since no one cares about the style of filming the camera guy should have just stuck to the basics. Its kind of annoying when you try to watch them build an engine and the camera keeps going in and out of focus at obscure angles

True I stand corrected

[acolella76]

and they probably didn't think that the people who would actually watch this wouldn't care too much about the "style" of filming they used...just interested in the actual craftsmanship, skill, and technique put into rebuild one of these engines and also all the useful information in it

you've got that backwards... since no one cares about the style of filming the camera guy should have just stuck to the basics. Its kind of annoying when you try to watch them build an engine and the camera keeps going in and out of focus at obscure angles

[samiam3356]

Yeah they messed up on that part but their target audience would be interested in the video enough to bare through the music and watch the video.

This and I did

What would you give to have that guys knowledge and access to those machines.

[slaterd]

cool, but the filming kinda sucked... kept going in and out of focus the whole time. I know that was the point but come on it's not a hipster music video

and they probably didn't think that the people who would actually watch this wouldn't care too much about the "style" of filming they used...just interested in the actual craftsmanship, skill, and technique put into rebuild one of these engines and also all the useful information in it

[slaterd]

Wow. Really the rap music makes me not care enough to watch. Their target audience would go for that music?

Yeah they messed up on that part but their target audience would be interested in the video enough to bare through the music and watch the video.

[matthilaman]

very cool series of videos...wish i had time and money to fool around with motors like that.

ive seen that white M3 in person a couple years ago..its a freaking monster and a half.

[F34R]

impressive, but the music is horrible. Mute, unmute, mute, unmute, mute, unmute

1+

Edit: Not sure if this is the same motor...but over 1k hp at stage 4

[acolella76]

cool, but the filming kinda sucked... kept going in and out of focus the whole time. I know that was the point but come on it's not a hipster music video

[samiam3356]

The other 3 videos don't have that god aweful shit

[CabrioPunk]

Wow. Really the rap music makes me not care enough to watch. Their target audience would go for that music?

[Gnarles]

impressive, but the music is horrible. Mute, unmute, mute, unmute, mute, unmute

+1

[samiam3356]

Impressive, but the music is horrible. Mute, unmute, mute, unmute, mute, unmute