I need a project car, something old, simple, maybe English..

[Charlie]

A sub 500 dollar '02 in Massachutsetts is going to resemble the flintstonemobile.

-Charlie

[cferb]

or find a clapped out 280z and turn it into a track rat

240! or 510

[eric (^__^)]

or find a clapped out 280z and turn it into a track rat

[eric (^__^)]

Buy a late 80's RX7 with a blown motor and shoehorn V8 into it

[gwb72tii]

hey, one good thing about british engineering is they perfected cars where there are no oil changes necessary

they leak so bad the oil never gets dirty. seriously.

[FLUTE007]

yeah, you'll spend far more than $500 on parts to get the thing into a semi-safe drivable condition. The initial cost of the car may be cheap but there's a reason for that.

qft

[WillisE30]

where are you going to work on the car and do you have the tools?

If you are bored, I would join good gym and start working on your own body, best project for under $500

Yeah, you'll spend far more than $500 on parts to get the thing into a semi-safe drivable condition. The initial cost of the car may be cheap but there's a reason for that.

[vlad]

where are you going to work on the car and do you have the tools?

If you are bored, I would join good gym and start working on your own body, best project for under $500

[apexede30]

2002 is a great choice. Or triumph spitfire, just because they make me all gooey inside.

[cferb]

Alfa?

[Dozyproductions]

No I don't really want fuel injection and E30s can't be had for sub 500$

project e30's can be.

[rmousir]

watch them british cars.. they have terrible rust and electrical issues. not saying don't get one.. just buyer beware. they are fun if they are in good shape. enjoy.

[Wishno87]

Triumph TR-6 with a 13b.

I have a spitfire project with a 13B that I havent touched in a few years. Rotarys confuse me.

[SamE30e]

Triumph TR-6 with a 13b.

[318isbmw]

2002's are awesome, but get expensive pretty quickly... But all projects are that way. I'd honestly go MG if you want something different and something fun. But an MG could get expensive quickly as well. I'd check for common parts and see if their cheap or if their expensive and go from there.