CNC Milling

[el bob]

M50 Throttle Position Sensor (TPS) adapter plates usually sell all that are made.

[whiltebeitel]

Miata's have 4x100, but the hub bore diameter is 54.1mm instead of 57.1mm on the e30.

[ethree]

???

Should have been more specific, m90 or m62 s/c brackets.

[StereoInstaller1]

Want top make something really cool that should actually sell?

Make an adapter to use E28 strut tubes on an E30.

Big brakes, 5 lug, add some of that magic that stops bump steer.

What the hell, figure out how to make them have adjustable caster and camber!

[THATDONFC]

Well I haven't sold any yet. I'm still waiting on the custom shift boots I'm having made. Im working on a design for the e30 bezel now.

[Stephen]

Those bezels are pretty cool, how much did they go for?

[THATDONFC]

It would be awesome if I could see pics on bf.c without making an account.

Spacers to fit Miata wheels on E30's.

What bolt pattern are the miata wheels?

brushed aluminum ebrake handle?

Do you want any special shape? Drop me a pm to talk more about it.

how about an entire ITB settup?

We did make an adapter to fit e24 m5 itb's on an m30.

many hours to design it? My brother owns a CNC machine shop and we've made lots of 1 off pulleys and it didn't take long at all...

Well were they quality pulleys, or half assed pulleys? Because its easy to make a pulley in an hour or so. But to actually take the time to write the programs and make the drawing in the computer and not to mention getting the crank pulley bolt pattern. And the machine time on the lathe. All this comes into play and you're still bound to fuck up at least once. And to those who can make a 1 off Crank pulley in less than 4 hours, come show me how...

M90 brackets?

???

[sefb222]

do you have any desire to mill some stuff thats not car related?

i need some small parts milled from 1018, pretty simple stuff, about 1000 pcs.

lemme know if you'd like a tech drawing to check out.

[ethree]

M90 brackets?

[kowalski]

i wonder how much interest I could spark with m42 underdrive pulleys. It would be quite expensive to make just one. It would take many hours of work to make the drawing from scratch not to mention the tooling and machining time. However it would be fairly less expensive to make a whole lote of them and sell them.

many hours to design it? My brother owns a CNC machine shop and we've made lots of 1 off pulleys and it didn't take long at all...

[SpecM]

how about an entire ITB settup?

[GaryE30]

what do you mean when you say intake manifold adapters? like flanges? Those might gauge some good interest for those who want to make their own intake manifold.

[gearheadE30]

dude no one is giong to pay bank to gain .5hp on an m42

It's an M42. We need all the help we can get. Granted, the more I think about this, the worse it sounds due especially to the fact that the e30 M42 doesn't use a serpentine belt. This may make offsets and alignment a bit difficult. The total price would also have to be less than or equal to a serpentine conversion, which achieves some of the same thing.

[Stephen]

brushed aluminum ebrake handle?

i want one to match my uuc knob :(

[whiltebeitel]

Spacers to fit Miata wheels on E30's. I have seen it done once, and it would open up lots of wheels to E30 guys, plus it's not a particularly complex part.