Mike's Cosmos Black 1998 M3 Sedan (M3/4/5) - Project Concord

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • CubbyChowder
    replied
    Man this thing is NICE! Looks like an absolute joy to drive. Clean glass does so much for a car too.

    Leave a comment:


  • s-thetikz
    replied
    ah i should've been more specific. i was referring to the white e36 you took shots with. i know the LTW's had a specific spoiler, which your buddy doesn't seem to have, but was wondering if it could be one considering the LTW decal.

    Leave a comment:


  • mike.bmw
    replied
    Originally posted by s-thetikz
    is that a real LTW? your cars lookin great as always. would love to see more of that interior
    Thanks! Nope, not a real LTW. Only 125 LTWs were made and all were coupes. The wheels are genuine stamped ("BMW MOTORSPORT") style 24s though, which are LTW wheels.

    I'll get some more shots of the interior and post them up! :-)

    Leave a comment:


  • s-thetikz
    replied
    is that a real LTW? your cars lookin great as always. would love to see more of that interior

    Leave a comment:


  • mike.bmw
    replied
    Some minor fixes here and there, but nothing worth reporting. Lots of great driving though! Here are some shots form the past couple of weeks (and some bonus shots with a friend's E36 M3).

    DSC_0417 by mike.bevels, on Flickr

    DSC_0416 by mike.bevels, on Flickr

    DSC_0411 by mike.bevels, on Flickr

    DSC_0405 by mike.bevels, on Flickr

    DSC_0388 by mike.bevels, on Flickr

    DSC_0395 by mike.bevels, on Flickr

    DSC_0419 by mike.bevels, on Flickr

    DSC_0416 by mike.bevels, on Flickr

    And some shots of my E30 for good measure:

    DSC_0457 by mike.bevels, on Flickr

    DSC_0414 by mike.bevels, on Flickr

    DSC_0454 by mike.bevels, on Flickr​

    Leave a comment:


  • mike.bmw
    replied
    What's new? Last week I took a short trip to Puerto Rico with my family. And then I wrote a feature piece for BimmerLife and published it earlier this week (I'm the editor)!

    DSC_0349 by mike.bevels, on Flickr

    Article: https://bimmerlife.com/2023/01/30/bm...n-puerto-rico/

    A friend hooked me up with a fire extinguisher mount, so today I picked up some hardware and installed it along with the loose fire extinguisher that came in the car.

    DSC_0382 by mike.bevels, on Flickr

    2023-02-02_04-46-07 by mike.bevels, on Flickr

    2023-02-02_04-45-47 by mike.bevels, on Flickr

    2023-02-02_04-44-48 by mike.bevels, on Flickr

    And I've been taking photos, which isn't a new thing. Another friend, Douglas, was kind enough to be a second driver.

    DSC_0567-3 by mike.bevels, on Flickr

    DSC_0728 by mike.bevels, on Flickr

    DSC_0719 by mike.bevels, on Flickr

    DSC_0613 by mike.bevels, on Flickr

    And we got some snow in Virginia. Barely any, but we'll count it.

    DSC_0404 by mike.bevels, on Flickr

    DSC_0403 by mike.bevels, on Flickr

    DSC_0401 by mike.bevels, on Flickr

    And more photos, just because I like taking them.

    DSC_0405 by mike.bevels, on Flickr

    DSC_0423 by mike.bevels, on Flickr

    DSC_0409 by mike.bevels, on Flickr

    DSC_0418 by mike.bevels, on Flickr


    That's all for now!

    Leave a comment:


  • mike.bmw
    replied
    Originally posted by OSAH racing
    I love that British racing green e36. I am guessing its BRG. What did you think of it? awesome photo quality as usual.
    Thanks! I have no idea what color green that E36 is, but it looks nice. May have been a wrap, but I didn't look too closely at it.

    E36 Mini Meet at Katie's Cars and Coffee yesterday! 3 M345s and 3 coupes. There were a handful of other E36 Ms scattered throughout the event as well.

    DSC_0598 by mike.bevels, on Flickr

    DSC_0632 by mike.bevels, on Flickr

    And my friend Alexis' new acquisition as of a few months ago:

    DSC_0693 by mike.bevels, on Flickr

    DSC_0692 by mike.bevels, on Flickr

    DSC_0697 by mike.bevels, on Flickr

    DSC_0686 by mike.bevels, on Flickr

    DSC_0684 by mike.bevels, on Flickr

    And some shots of my M345, Project Concord, from a quick lunch run on Friday.

    DSC_0663 by mike.bevels, on Flickr

    DSC_0697-3 by mike.bevels, on Flickr

    DSC_0651 by mike.bevels, on Flickr

    DSC_0643 by mike.bevels, on Flickr

    DSC_0738 by mike.bevels, on Flickr

    DSC_0640 by mike.bevels, on Flickr

    DSC_0594-2 by mike.bevels, on Flickr

    Leave a comment:


  • OSAH racing
    replied
    I love that British racing green e36. I am guessing its BRG. What did you think of it? awesome photo quality as usual.

    Leave a comment:


  • mike.bmw
    replied
    I did some work on the car today. Well, let's be honest, I do work on the car every day. But today I'm posting about it!

    After I had a shop replace the radiator, the thermostat failed open a week later. So I had the shop replace the water pump (Stewart), thermostat, hoses, expansion tank, etc. Pretty much everything except the coolant level sensor. And I had a shop do it because I didn't want to deal with coolant (draining, disposing, refilling, bleeding).

    Well, that broke too. So today I replaced it. I did this without loosing too much coolant by clamping off the small top hose that runs to the expansion tank, and the larger lower hose that runs under the intake manifold.

    I sucked out the coolant from the expansion tank with this nifty $10 extractor from Amazon. I put it in a clean (and empty) distilled water jug.

    2023-01-19_08-50-55 by mike.bevels, on Flickr

    And then I removed all of the pieces of the old coolant level sensor. It really came apart in there. I did this with a long, thin rod and pushed the debris out the open hold in the bottom of the expansion tank.

    2023-01-19_08-50-25 by mike.bevels, on Flickr

    I threaded the new sensor into place, unclamped the hoses, put the shroud back into place, buttoned everything up, and then bled the system.

    2023-01-19_08-50-41 by mike.bevels, on Flickr

    Job done. No more "Low coolant" warning light at start up and shut down. Hurray.

    Earlier in the week, I replaced the alternator on my E30 318is (for a second time as the first one was DOA, which I found out after installing it).

    2023-01-17_07-57-04 by mike.bevels, on Flickr

    I also wrote a piece for BimmerLife this week on removing stubbon water spots from glass: https://bimmerlife.com/2023/01/16/wa...n-water-spots/

    DSC_0604 by mike.bevels, on Flickr

    And I got out a few times for one of my favorite things, taking photos of cars:

    DSC_0724 by mike.bevels, on Flickr

    DSC_0587 by mike.bevels, on Flickr

    DSC_0586 by mike.bevels, on Flickr

    DSC_0645 by mike.bevels, on Flickr

    DSC_0713 by mike.bevels, on Flickr

    DSC_0605 by mike.bevels, on Flickr

    Leave a comment:


  • YAN-3
    replied
    Originally posted by mike.bmw

    Thanks! I'm in Northern, VA.
    Woodbridge area. We should g2g for a shoot....once I get my M3 on the ground again lol

    Leave a comment:


  • mike.bmw
    replied

    I've been busy with lots of small-scale projects on Project Concord.

    The windshield washer reservoir was cracked so I replaced it. But it couldn't have been that easy, right?

    2023-01-04_07-42-33 by mike.bevels, on Flickr

    2023-01-04_07-42-18 by mike.bevels, on Flickr

    The level sensor grommet broke, so I had to order one. Once I got that back together, I realized that washer fluid was coming out from under the hood pad, so I removed that to find the heated nozzles were cracked at the 90-degree bend where the hose attaches. I'm not a "cheap" person per se, but at $60 per heated nozzle I decided to go with non-heated nozzles and the corresponding check valves. New hose as well!

    2023-01-04_07-40-39 by mike.bevels, on Flickr

    2023-01-04_07-40-49 by mike.bevels, on Flickr

    I clipped the pigtails off the heated nozzles, heat-strinked the exposed ends, and electrical-taped them as well.

    2023-01-04_07-40-07 by mike.bevels, on Flickr

    Naturally once I had it all back together I realized that I had routed the hoses incorrectly. So I took it apart again and fixed that.

    2023-01-04_07-40-23 by mike.bevels, on Flickr

    2023-01-04_07-39-57 by mike.bevels, on Flickr

    Once the washer system was fully functional, I turned to something that had been bothering me since I bought the car: water spots on the windows. BAD water spots. Water spots forged in the depths of hell. Nothing seemed to remove these (specific water-spot removal chemicals, white vinegar/water solutions, magic eraser, etc). So I broke out the buffer and some compound. BOOM! Done.

    2023-01-04_07-39-27 by mike.bevels, on Flickr

    2023-01-04_07-38-47 by mike.bevels, on Flickr

    2023-01-04_07-38-05 by mike.bevels, on Flickr

    Another small project was replacing the lower door plugs. These were long gone and I believe the voids were causing extra wind noise while driving. I found some 20mm rubber sheet metal plugs on Amazon that work perfectly:

    2023-01-04_07-41-41 by mike.bevels, on Flickr

    2023-01-04_07-41-52 by mike.bevels, on Flickr

    Moving forward, I'll try to go into more detail on specific work/repairs/upgrades in individual posts. I glossed over some things that I had included in the BimmerLife articles linked in the first post: trunk harness replacement, door lock actuator replacement, trans mounts, rear sway bar endlinks, cooling system replacement, roof paint correction, driver and passenger seat recline gear replacement.

    And some beauty shots for good measure:

    DSC_0634 by mike.bevels, on Flickr

    DSC_0662 by mike.bevels, on Flickr

    DSC_0663 by mike.bevels, on Flickr​

    Leave a comment:


  • mike.bmw
    replied
    Originally posted by YAN-3
    very cool. where in VA are ya located?
    Thanks! I'm in Northern, VA.

    Leave a comment:


  • YAN-3
    replied
    very cool. where in VA are ya located?

    Leave a comment:


  • mike.bmw
    replied
    Happy Holidays!

    DSC_0710 by mike.bevels, on Flickr

    I have been trying to take that shot for a few weeks now, but the street has been closed for various activities. Well, not at 6:30AM this morning, when it was 5 degrees Fahrenheit outside! I had taken a similar shot with my E30 on Christmas Eve last year, just with the tree on the opposite side of the street:

    DSC_0273 by mike.bevels, on Flickr

    Lots of driving and various photos, when I have time:

    DSC_0729 by mike.bevels, on Flickr

    DSC_0657 by mike.bevels, on Flickr

    DSC_0624 by mike.bevels, on Flickr



    Other than that, I've been enjoying the car. It has received a new cooling system: Stewart pump, thermostat, CSF radiator w/ poly offset mounts for clearance, a new expansion tank and cap, and hoses all around (performed by a local shop RRT). I've done all of the door lock actuators, replaced the trans mounts, replaced the rear sway bar endlinks, replaced the trunk harness, replaced both broken front seat recline gears, and the washer fluid reservoir tank, hoses, nozzles, and valves. Lots more work to come!

    2022-12-04_03-47-54 by mike.bevels, on Flickr

    2022-12-04_03-47-25 by mike.bevels, on Flickr

    2022-12-04_03-47-13 by mike.bevels, on Flickr

    2022-12-04_03-46-30 by mike.bevels, on Flickr

    2022-12-12_06-55-47 by mike.bevels, on Flickr

    2022-11-29_08-25-16 by mike.bevels, on Flickr

    2022-11-25_07-59-07 by mike.bevels, on Flickr

    DSC_0589 by mike.bevels, on Flickr

    DSC_0560-2 by mike.bevels, on Flickr

    Leave a comment:


  • KI4UJO
    replied
    Nice! As a fellow M3/4/5 owner, you won't regret this purchase decision. I've considered selling mine a couple of times, and then realize how stupid that would be.

    Leave a comment:

Working...