1981 320i E21 Ballin' On A Budget- Weekend Makeovers

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • gofredo50
    replied
    You. You're very good you.

    Leave a comment:


  • kansas-ix
    replied
    Liking what I see in the darkness!

    Leave a comment:


  • LuckyHenriksen
    replied
    another shot of the setup, will get more in the daylight

    Leave a comment:


  • LuckyHenriksen
    replied
    *SUNDAY UPDATE*



    So I spent a lazy sunday puttering in the shop, gave the car a tune up and worked on the front end a bit.



    Did the usual plugs/cap/rotor treatment, along with an air filter. Also replaced the torn intake boot, lucky for me I had several spares haha







    Spark plugs were haggard




    Then I got the sprt valence mounted up. Got her screwed down and love the way it looks.
    Looked around for something to make a "bumper" out of and pried the rubber strip of the big diving board bumper. Cut it into 3 pieces with the sawzall, sectioned a couple inches out, found some misc. screws from the door cards of an E28 and bolted her up. Then I stuck a euro plate over top of it all and sat back to admire my work.





    I absolutely love it. Ghetto fab to the max, and it doesn't look half bad IMO


    Next up, suspension and roof rack

    Leave a comment:


  • Dave-ger
    replied
    Originally posted by LuckyHenriksen
    Oh nice, I will have to try that. They are definitely shot. and if they don't slam it enough I will just have to start cutting coils :)
    that is always an option, that way you'll also have an alternative for when you decide the the lowering springs didn't lower it enough. ;)

    Leave a comment:


  • c4ls7
    replied
    Oh man, so much e21 content, I'm not sure if I can control myself. I can't wait to see more.

    Subscribed

    Leave a comment:


  • LuckyHenriksen
    replied
    Originally posted by Dave-ger
    if your struts are shot like mine were, you can get the stock coils off with some spring compressors without undoing any ball joints. And no offense, but I don't think those springs will "slam" it.
    Oh nice, I will have to try that. They are definitely shot. and if they don't slam it enough I will just have to start cutting coils :)

    Originally posted by BeemerBuyer
    When I'm in portland next, I'm going to shoot you a PM. I want to come and check out your shop and cars!
    Do it! Shop BBQ time

    Leave a comment:


  • Butler
    replied
    When I'm in portland next, I'm going to shoot you a PM. I want to come and check out your shop and cars!

    Leave a comment:


  • Dave-ger
    replied
    if your struts are shot like mine were, you can get the stock coils off with some spring compressors without undoing any ball joints. And no offense, but I don't think those springs will "slam" it.

    Leave a comment:


  • LuckyHenriksen
    replied
    Originally posted by Steven_Anderson
    did you pick up with euro for sale? those bumpers would look sick on this.
    Nah, I have been talking to that guy though. It is currently too rich for my blood but I will go check it out one of these days

    Originally posted by msportr430
    This is one long ass weekend. ;)
    You mean a few long ass weekends? :P

    Leave a comment:


  • msportr430
    replied
    This is one long ass weekend. ;)

    Leave a comment:


  • Steven_Anderson
    replied
    did you pick up with euro for sale? those bumpers would look sick on this.

    Leave a comment:


  • LuckyHenriksen
    replied
    Thanks :) As for the springs, I am keeping them a secret until I find out if they actually work lol. And I do want some singles :P

    Leave a comment:


  • ck_taft325is
    replied
    So awesome. And I hate E21's...

    Leave a comment:


  • SLOWER
    replied
    subscribbled.

    Leave a comment:

Working...