Soooooooon
Collapse
X
-
Okay so I ran into a problem, and I'm hoping to get some info from a more experience E30 nut. Everything I've read suggests that a '92 Vert would use 51mm strut housings, actually what I read over and over was that all six cylinders used 51mm and 318's after '90 too, and so thats what I ordered. Now that everything is apart and waiting to go back together, I find that the new struts I have do not fit down the housing, they get stuck about half way, and I've discovered too late, are definitely a little larger than the OEM's I removed. I ran a tape across the housing and it appears to be 45mm, did I fuck up in grand newb fashion or is there something weird here? Also do I have to worry about the rears now?Leave a comment:
-
-
rut row.
just a friendly fyi, HRrace and IE3 on a vert exaggerates the rear sag dramatically more than a sedan or even a coupeLeave a comment:
-
I spent the first 20+ years of my life in PS/CatCity. I used to do home maintenance/repair out there and I've worked on something in every park in D-Town. Plus, I used to buy TV's at 2AM @ AMPM. Car looks good. Nice to see the e30's poppin up in the Valley, makes me miss my homeland.Leave a comment:
-
o.0 wut? It's like an old folks "village" my father in law lives in, goes back to when DHS was actually known for Mineral Hot Springs, way on the east end.
92 325ic "Betty"
Leave a comment:
-
I've been to your Trailerpark in the Dirty D I bet. The tweekers still trying to sell 23" TV's at AMPM at 2AM?Leave a comment:
-
-
Is the hard cover manual that coveted? Because you can get them from Amazon or Blunt.Leave a comment:
-
That hardcover probably stays together longer than that wheel bearing.... unlike the soft cover. Nice score OP! So NAR NAR!!!!!!!!!!!!!!Leave a comment:
-
HAHA! Everybody is looking at the hardcover Bentley and nothing at the parts...including me!Leave a comment:

Leave a comment: