A friend took a vid
Plain ol' '88 325i sedan...or should I say 333i
Collapse
X
-
3.73 lsd with 210k on it. Everything within spec, Didn't even need to rebuild it!




SKF vs. FAG


Reused these till I break one






lawwl






Ignore reversed tire...


Leave a comment:
-
-
I tossed her on here...

And got this...

Lined up toe, but I've still got some serious issues in the rear.
Leave a comment:
-
If someone is welding a diff, I really don't think they give a flying f*ck about splatter. Also, I completely covered the main gear with leather and coated everything but the spider gears with antisplatter.
Anyone who is interested in a 100% locked diff isnt too concerned about precision hahaLeave a comment:
-
Temporary relief from the one wheel peel
Trying to find a decent lsd for him asap!Leave a comment:
-
^^^ Never understood why people do this... Fill it with aluminum. Welding promotes way to much distortion. Read at the bottom.
AndWelding a diff in my opinion is just asking for trouble .... lets take a precision cast steel component and cover it with splatter distort it and generally destroy any hope it has of being a precision item anymore. I have seen welded diffs with 015" lash on one side of the crown wheel and 002" on the other!! .... how long do you think that will last.
I have done it using an old blowing vacuum a pot and some nice BBQ coal and an old vacuum that blows. I have a little pot furnace now and I use smashed up pistons for the alloy.Leave a comment:
-
-
I'll probably never end up installing a/c
I should have videoed the burnout session.Leave a comment:
-
Looking good. I think I still have the a/c mounting if you ever wanted to put a/c in this thing.Leave a comment:


Leave a comment: